Seiko Y182 manual Time Setting, When setting Hour hand, check that AM/PM is correctly set

Page 6

English

TIME SETTING

Hour hand

Minute hand

 

 

1

 

60

45

15

 

 

30

 

 

 

 

 

3

Second hand

CROWN 1

2

CROWN 1

1Pull out to second click when Second hand is at the 12 o’clock

position.

2Turn to set Hour and Minute

hands.

3Push back in to normal position in accordance with a time signal.

NOTES

1When setting Hour hand, check that AM/PM is correctly set.

*The watch is so designed that the date changes once in 24 hours. Turn the hands past the 12 o’clock marker to determine whether the watch is set for the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If the date does not change, the time is set for the P.M. period.

2When setting Minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.

6

Image 6
Contents Page Contents Features Seiko Analogue QuartzDisplay and CROWNS/BUTTONS There are three buttons and two crownsDate Setting CrownTime Setting When setting Hour hand, check that AM/PM is correctly setAlarm Adjustment of Alarm handsAlarm time setting TionPull out to first click Alarm engagement Alarm disengagementAlarm engaged Alarm disengaged Push back in to normalStopwatch Stopwatch OperationStart Stop Finish Time 2ND Competitor Reset Tachymeter To measure the hourly average speed of a vehicleTo measure the hourly rate of operation Adjusting the Hand Position Resetting the BUILT-IN IC Battery Life Indicator Battery ChangeEnglish