Seiko Y182 manual Adjusting the Hand Position

Page 15

ADJUSTING THE HAND POSITION

●If STOPWATCH hands will not return to the 12 o’clock position when the stopwatch is reset or when the battery is replaced with a new one, follow the procedure below.

English

CROWN 1

B 30 A

25

5

20		10	➠
	MIN.
			➠

NOTES

CROWN 1

▼

A

▼

B

▼

CROWN 1

Pull out to second click.

Press repeatedly to reset STOPWATCH minute hand to the 12 o’clock position.

Press repeatedly to reset STOPWATCH second hand to the 12 o’clock position.

Push back in to normal posi-

tion.

1Hands move quickly if the respective buttons are kept pressed.

2After adjusting the hand position, set the main time.

15

Image 15

Contents Page Contents Seiko Analogue Quartz FeaturesThere are three buttons and two crowns Display and CROWNS/BUTTONSCrown Date SettingWhen setting Hour hand, check that AM/PM is correctly set Time SettingAdjustment of Alarm hands AlarmTion Alarm time settingPush back in to normal Alarm engagement Alarm disengagementAlarm engaged Alarm disengaged Pull out to first clickStopwatch Operation StopwatchStart Stop Finish Time 2ND Competitor Reset To measure the hourly average speed of a vehicle TachymeterTo measure the hourly rate of operation Adjusting the Hand Position Resetting the BUILT-IN IC Battery Change Battery Life IndicatorEnglish