6Activate Surround or DSP Mode, Stop Playback

To turn off the sounds temporarily

From the remote control ONLY:	MUTING
Press MUTING.

To restore the sound, press MUTING again.

• Pressing AUDIO VOL + or – also restores the sound.

6Activate Surround or DSP Mode

You can enjoy three kinds of surround—Digital Multichannel Surround (Dolby Digital and DTS Digital Surround), Dolby Pro Logic II and DSP modes.

Digital Multichannel Surround—Dolby Digital and DTS Digital Surround

Dolby Digital or DTS Digital Surround takes effect only when you enjoy a disc encoded with its signals.

To activate Dolby Digital or DTS Digital Surround

When a disc encoded with the Dolby Digital or DTS Digital Surround is loaded, the system detects it and starts playing the disc automatically with Multichannel Surround activated.

–For in-depth information about surround modes, see “Creating Realistic Sound Fields” on pages 19 to 21.

–For in-depth information about DSP modes, see “Creating Realistic Sound Fields” on pages 19 to 21.

Note:

Before activating the Surround or DSP mode, adjust the speaker setting to bring out the best performance from this system.

For in-depth information about adjusting the speaker setting, see “Setting Menu” on pages 55 and 56.

7 Stop Playback

Press 7 twice.

Playback stops completely.

•This system can memorize the end point even when you press 7 once. When you start playback again by pressing 3, playback begins from where it has been stopped— Resume play.

To remove the loaded disc

Press 0.

“OPEN” appears on the display and the disc tray comes out.

To close the disc tray, press 0 again.

Dolby Pro Logic II—Pro Logic II Music and Pro Logic II Movie

To activate Pro Logic II modes

Press SURROUND.

SURROUND

The current Pro Logic II mode appears on the display for a while.

•Each time you press the button, Pro Logic II mode changes as follows:

PL II MUSIC PL II MOVIE

PL II OFF

• When Dolby Pro Logic II mode is activated, the PRO LOGIC

II indicator lights up on the display.

–For in-depth information about Dolby Pro Logic II modes, see “Creating Realistic Sound Fields” on pages 19 to 21.

DSP modes—CONCERT, STADIUM, HALL,

THEATER, LIVE HOUSE

To activate DSP modes

Press DSP.

DSP

The current DSP mode appears on the display for a while.

•Each time you press the button, DSP mode changes as follows:

LIVE HOUSE HALL CONCERT

DSP OFF THEATER STADIUM

To prohibit disc ejection

On the front panel ONLY:

Press and hold 6 and 4 for more than 3 seconds.

“LOCKED” appears on the display, and the disc tray is locked.

To cancel the prohibition, press and hold

6and 4 for more than 3 seconds.

“UNLOCK” appears on the display, and the disc tray is unlocked.

To turn off the power (into standby)

Press AUDIO

(or STANDBY/ON on the front AUDIO

panel).

The illumination lamp goes off and the STANDBY lamp lights up.

•If you press AUDIO (or STANDBY/ON on the front panel) while the disc tray is kept open, the disc tray closes automatically, then the system is turned off.

•A small amount of power is consumed even in standby mode. To turn the power off completely, unplug the AC power cord.