English
AM antenna
1 | 2 |
|
|
Connecting Speakers
FOR UX-J66V:
1
ANTENNA
EXT
LOOP
75 FM COAXIAL
3
(not supplied)
2 | 3 |
Gray | RIGHT | LEFT | RIGHT | LEFT | Red |
Speaker | MAIN SPEAKERS | SUBWOOFERS | Speaker | ||
cord | CAUTION: SPEAKER IMPEDANCE 6 | cord | |||
| Blue |
| Black |
|
AM loop antenna
(supplied)
1If the cords are covered with insulation, remove a short section of insulation at the end of each cord by twisting and pulling it off.
2Connect the AM loop antenna to the AM LOOP terminals as illustrated.
3Turn the AM loop antenna until you have the best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single
For better reception of both FM and AM
•Make sure the antenna conductors do not touch any other terminals and connecting cords.
•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.
INPUT | INPUT | INPUT | INPUT |
Right speaker | Left speaker |
FOR |
|
SPEAKERS RIGHT | LEFT |
Speaker cord | Speaker cord |
SPEAKER | |
IMPEDANCE |
|
6 - 16 |
|
Right speaker | Left speaker |
1If the cords are covered with insulation, remove a short section of insulation at the end of each cord by twisting and pulling it off.
2Press and hold the clamp of the speaker terminal as illustrated.
3Insert the end of the speaker cord into the
terminal.
Match the polarity between the unit and the speaker terminals: ª to ª and · to ·.
4Release your finger from the clamp.
7