JVC UX-J66V, GVT0116-003B, UX-J55V manual Program Play, Playing at Random-Random Play

English

Programming the Playing Order of the Tracks

—Program Play

You can arrange the order in which tracks play before you start playing. You can program up to 50 tracks.

On the remote control ONLY:

1 Load a disc.

•If the current playing source is not the CD player, press CD 3/8, then 7 before going to the next step.

2 Press PRGM (program). PRGM

The PRGM (program) indicator lights up on the display.

PRGM ST

•If a program has been stored in memory, the program is called up.

3	Press UP or DOWN to select the			UP
	track number, then press SET.
	• You can select the track number directly			DOWN
	using the number button(s). (See “To go
	to another track directly using the
	number buttons.”)
				SET
		PRGM ST
		Track number	Program step number

4 Repeat step 3 to program other tracks you want.

5 Press CD 3/8.

The tracks are played in the order you have	CD
	/SELECT
programed.

If you try to program a 51st track

“FULL” will appear on the display.

To stop playing, press 7.

To exit from Program Play, press PRGM (program) before

or after playing.PRGM

• The PRGM (program) indicator goes off.

To check the program contents PREV. NEXT

You can check the program contents by pressing ¢ or 4 before or after playback.

•¢ : To check the contents in the programmed order.

•4 : To check the contents in the reverse order.

To modify the program

On the remote control ONLY:

Before or after playing, you can erase the last	CANCEL
programed track by pressing CANCEL.

•Each time you press the button, the last programed track is erased from the program.

To add tracks in the program before playing, simply select the track numbers you want to add by following step 3 of the programming procedure.

To erase the program, press 7 before or after playing.

• Disc ejection also erases the program.

If additional track cannot add into the program list, repeat from step 1.

Playing at Random—Random Play

The tracks will play in no particular order when you use this mode.

On the remote control ONLY:

1 Load a disc.

•If the current playing source is not the CD player, press CD 3/8, then 7 before going to the next step.

2	Press RANDOM.	RANDOM
	The RANDOM indicator lights up on the
	display.
3	Press CD 3/8.	/SELECT
		CD

The tracks are randomly played. Random Play ends when all the tracks are played once.

To skip the current track, press ¢. NEXT

•You cannot go back to the previous track by pressing 4.

To stop playing, press 7.

To exit from Random Play, press RANDOM before or after playing.

Random Play is canceled and Normal Play resumes.

• The RANDOM indicator goes off.

17