JVC UX-J66V, UX-J55V Using Sleep Timer, Adjust the clock if you need, Press STANDBY/ON to turn

English

5 Press UP or DOWN to set the volume level, then press CLOCK/TIMER.

•You can select the volume level (“VOLUME – –” and “VOLUME 0” to “VOLUME 40”).

If you select “VOLUME – –,” the volume is set to the previous level when the unit was turned off.

•To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level “VOLUME 0.”

The unit enters the clock setting mode.

6 Adjust the clock if you need.

• See “Setting the Clock” on page 9.

7 Press STANDBY/ON to turn	STANDBY/ON
off the unit (standby) if you have
set the timer with the unit turned
on.

• When the timer turns on the unit, the (timer) and the selected timer mode indicators (DAILY or REC) start flashing.

To deactivate the timer temporarily, press	CLOCK
and hold CLOCK/TIMER until the (timer)	/TIMER
indicator on the display goes off.

To activate or change the timer (with the previous setting), follow steps 1 to 7 on pages 28 and 29.

•If you want to change the timer setting after the Daily Timer be used, first deactivate the timer.

•If the unit is turned on when the timer on-time comes Timer does not work.

•When you unplug the AC power cord or if a power failure occurs

The timer will be canceled. You need to set the clock first, then the timer again.

Using Sleep Timer

With the Sleep Timer, you can fall asleep to music. You can set the Sleep Timer when the unit is turned on.

How the Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY:

1 Press SLEEP. SLEEP

The time length until the shut-off time appears and the SLEEP indicator lights up on the display.

•Each time you press the button, the time length changes as follows:

SLEEP 10 SLEEP 20 SLEEP 30

SLEEP 60

Canceled SLEEP120 SLEEP 90

2 Wait for about 5 seconds after specifying the time length.

The illumination and display dim.

To check the remaining time until the shut-off time, press

SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds.

• The illumination and display brighten during this period.

To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly until the SLEEP indicator goes off.

•The Sleep Timer is also canceled when you turn off the unit.

•If you set the Sleep Timer after the Daily Timer starts playing the selected source

The Daily Timer is canceled. When the Sleep Timer shut-off time comes, the unit will be turned off.

•If you set the Sleep Timer after the Recording Timer starts recording

The Recording Timer is canceled, but recording continues until the Sleep Timer shuts off the power.

29