Seiko 7K52 manual Battery Life Indicator, Battery Change

Page 27

BATTERY LIFE INDICATOR

When the battery nears its end, the small second hand moves at two-second intervals instead of the normal one-second intervals. In that case, the watch will stop operating in 2 to 3 weeks. Replace the battery with a new one as soon as possible.

*While the small second hand is moving at two-second intervals, the watch remains accurate but the alarm will not ring.

While the small second hand is moving at two-second intervals, do not use the watch for diving, as the watch does not measure the depth.

When the battery nears its end, the DEPTH hand indicates the 58-minute position when button B is pressed to reset the hands for diving measurement to “0” position.

* When the log data is displayed, however, the DEPTH hand does not indicate the 58-minute position.

English

BATTERY CHANGE

2

Years

The miniature battery which powers your watch should last approximately 2 years. However, because the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period. When the battery expires, be sure to replace it as soon as possible to prevent any malfunction. For battery replacement, we recommend that you contact an AUTHORIZED SEIKO DEALER and request SEIKO CR2016 battery.

27

Image 27
Contents Cal K52 English English English Contents SINGLE-TIME Alarm Diving MeasurementTIME/CALENDAR Screw lock type Small second hand CrownTo unscrew the crown To screw in the crown HOW to USE the Screw Lock Type CrownTIME/CALENDAR Setting Press repeatedly until you hear a long beep Adjusting the Hand Position Before DivingDiving Measurement HOW to Read the MeasurementsPress button B repeatedly HOW to USE the Diving FunctionRapid ascent warning CaseBeep Beep Rapid Ascent WarningAbnormal Measurement / Measurement Halt Warning Extra Measurement Range Warning LimitEnglish Diving hands at Position Recall of LOG DataLog data of the last dive Log data of the dive before lastRotating Bezel Alarm Time Setting SINGLE-TIME AlarmBefore Diving Precautions for DivingWhile Diving After Diving Adjusting the Hand Position Before Diving TIME/CALENDAR SettingHow to read the measurements How to use the diving functionExtra measurement range warning Recall of LOG Data Abnormal measurement / measurement halt warningRemarks on the indication of MAX.DEPTH and Depth hands SINGLE-TIME Alarm Battery Change Battery Life IndicatorEnglish Necessary procedure after battery change To extend the band length HOW to USE the Diver ExtenderSpecifications Accuracy of the alarm ± 1 minute