Seiko 7K52 manual SINGLE-TIME Alarm

Page 26

English

SINGLE-TIME ALARM

●When button B is pressed to reset the hands for diving measurement, check that the small hands at the 6 o’clock position indicate the current time.

●While you are at a depth of 1.6 m or more underwater and for 10 minutes after a dive, the single-time alarm function cannnot be used.

●The small hour and minute hands advance quickly if button A is kept pressed.

●Do not recall the log data while the alarm is engaged. Otherwise, the small hands at the 6 o’clock position move to indicate the time submerged and the alarm time you have set is automatically canceled.

●The alarm time you have set is also canceled automatically when the watch is used for diving.

26

Image 26

Contents Cal K52 English English English Contents TIME/CALENDAR SINGLE-TIME AlarmDiving Measurement Crown Screw lock type Small second handHOW to USE the Screw Lock Type Crown To unscrew the crown To screw in the crownTIME/CALENDAR Setting Adjusting the Hand Position Before Diving Press repeatedly until you hear a long beepHOW to Read the Measurements Diving MeasurementHOW to USE the Diving Function Press button B repeatedlyCase Rapid ascent warningRapid Ascent Warning Beep BeepExtra Measurement Range Warning Limit Abnormal Measurement / Measurement Halt WarningEnglish Log data of the dive before last Recall of LOG DataLog data of the last dive Diving hands at PositionRotating Bezel SINGLE-TIME Alarm Alarm Time SettingPrecautions for Diving Before DivingWhile Diving After Diving TIME/CALENDAR Setting Adjusting the Hand Position Before DivingExtra measurement range warning How to read the measurementsHow to use the diving function Remarks on the indication of MAX.DEPTH and Depth hands Recall of LOG DataAbnormal measurement / measurement halt warning SINGLE-TIME Alarm Battery Life Indicator Battery ChangeEnglish Necessary procedure after battery change HOW to USE the Diver Extender To extend the band lengthSpecifications Accuracy of the alarm ± 1 minute