Seiko 9S519S559S56 manual Date adjustment at the end of the month

Page 13

4

6

Push the crown back in to the normal position in accordance with a time signal for "00" seconds. The second hand will start moving immediately.

If the crown is of the screw lock

type, screw it in completely by turning it clockwise while pressing it.

<Date adjustment at the end of the month>

It is necessary to adjust the date at the end of February and a 30-day month.

EXAMPLE: To adjust the date in the A.M. period on the first day of a month following a 30- day month

①The watch displays "31" instead of "1". Pull out the crown to the first click.

If the crown is of the screw lock type, unscrew the crown by turning it counterclockwise, and then

pull it out.11

②Turn the crown clockwise to set the date to "1" and then push it back to the normal position.

If the crown is of the screw lock type, screw it in completely by turning it clockwise while pressing it.

・Do not set the date between 10:00p.m. and 1:00a.m. Otherwise, the date may not change properly.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Instruction Page Instruction Page Contents HOW to USE Page Hour hand Minute hand Crown Second hand To set the timePage Date Hour handPage Page Date adjustment at the end of the month Hands with 24-HOUR Hand cal S56 Time setting procedure has been completed When it is 1000 AM in Japan Time setting procedure has been completed Be obtained from the following formula〔b〕―〔a〕 Time difference adjustmentTime difference adjustment GMT Page Crown Hour Hand Hour hand Second handDay is advanced or put back, respec- tively 【Date adjustment at the end of the month 】 To Preserve the Quality of Your Watch Rash and Allergy Water Resistance Precautions on Wearing Your Watch Places to Keep Your Watch Periodic Check Trouble Cause Solution Trouble ShootingCation 9S51 9S55 9S56 Time indiJewels Remarks on Replacement Parts
Top Page Image Contents