Reinforcing the Bass Sound (AHB PRO)
You can reinforce the bass sound to maintain rich, full bass at low volume (you can use this effect only for playback):
To get the effect, press the AHB (Active Hyper Bass) PRO but- ton.
The “BASS” indicator lights up on the display. To cancel the effect, press the button again. The “BASS” indicator goes out.
Tone Control (BASS/TREBLE)
You can control the tone by changing the bass and treble. The analog clock acts to display the bass and treble settings.
By pressing either the BASS or TREBLE button on the Remote Control, you can visually see the current tone control settings.
Examples: |
|
|
|
|
|
| |
|
| FLAT |
|
| Fully boosted |
| |
( | ) | ( | ) | ( | ) | ( | ) |
Showing the Time (DISPLAY) | English | |
In Standby mode, the digital clock and analog clock appear on the | ||
| ||
display at the same time. Only the analog clock is displayed when a |
| |
music source is selected. You can see the analog clock at all times. |
| |
When the System is turned on, you can display the digital clock at any |
| |
time. |
|
To display the digital clock, press the CLOCK button on the Unit or DISPLAY button on the Remote Control.
To return to the previous mode, press the same button again.
Minute Hand 
Second Hand
Hour Hand
Note: To let the clock work, you need to set the clock beforehand. (See “Setting the Clock” on page 18.)
BASS Control ———————————
You can adjust the bass level (low frequency range level) between
■1. Press the BASS button on the Remote Con- trol.
■2. Press the UP or DOWN button on the
Remote Control to adjust the bass level.
BASS
DOWN | UP |
TREBLE Control ——————————
You can adjust the treble level (high frequency range level) between
■1. Press the TREBLE button on the Remote
Control.
■2. Press the UP or DOWN button on the
Remote Control to adjust the treble level.
TREBLE
DOWN | UP |
7