JVC UX-V55R manual Connecting the Speakers, Connecting External Equipment

Page 8

English

CAUTION: Make all connections before plugging the System into an AC power outlet.

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.

1.Open each of the terminals and insert the speaker wires firmly, then close the terminals.

2.Connect the red (+) and black (–) wires of the right side speaker to the red ( +) and black (–) terminals marked R on the System. Connect the red (+) and black (–) wires of the left side speaker to the red ( +) and black (–) terminals marked L on the System.

Right speaker (rear side)

Left speaker (rear side)

Black

L

R

SPEAKERS

IMPEDANCE

MIN 4Ω

CAUTION: A TV may display irregular colors if located near the speakers. If this happens, set the speak- ers away from the TV.

Connecting External Equipment

Connect signal cords (not supplied) between the System’s LINE IN (AUX)/LINE OUT terminals and the output/input terminals of the external MD recorder, tape deck, etc.

You can then listen to the external source through the System, or record the System’s CD player, cassette tape, or tuner to the external unit.

 

 

Signal cord (not supplied)

MD recorder or tape deck (not supplied)

 

 

Pin-plug x 2

Pin-plug x 2

 

 

LINE OUT

 

 

 

R

L

 

 

 

 

LINE IN

Signal cord (not supplied)

 

 

(AUX)

 

 

 

 

 

 

 

Pin-plug x 2

Pin-plug x 2

 

Connecting an MD Recorder, etc (Digital Output)

Unplug the cap and connect an optical digital cord (not supplied) between the System’s OPTICAL DIGITAL OUT terminal and the input ter- minal of the MD recorder, etc.

You can record the digital output signal from the System’s CD Player to the MD recorder, etc.

Cap

MD recorder, etc. (not supplied)

OPTICAL

DIGITAL OUT

Optical digital cord (not supplied)

4

Image 8
Contents UX-V55R Achtung Precaucion ventilación correcta Class Laser Product Table of Contents Accessories How To Put Batteries In the Remote ControlUsing the Remote Control Getting StartedConnecting the FM Antenna Connecting the AM MW/LW AntennaUsing the Supplied Wire Antenna Using the Coaxial Type Connector Not SuppliedConnecting an MD Recorder, etc Digital Output Connecting the SpeakersConnecting External Equipment Connecting the AC Power Cord On the Unit On the Remote ControlTurning the Power On and Off Adjusting the VolumeAdjusting the Brightness Dimmer Common OperationsReinforcing the Bass Sound AHB PRO Tone Control BASS/TREBLEShowing the Time Display Bass ControlUsing the Tuner Tuning In a StationPresetting Stations Manual PresettingAuto Presetting To Change the FM Reception ModeTo show the RDS signals on the display Receiving FM Stations withPress the PTY/EON button within 10 sec- onds again To search for a programme by PTYCodes To select a programme type News NewsUsing the CD Player Basics of Using CD Player-Normal PlayTo Insert a CD To Unload a CDRepeating Tracks Programming Playing Order of the TracksRandom Play Using the Cassette Deck Listening to a Tape Reverse ModeRegular Play One Touch PlayUsing the Cassette Deck Recording Standard RecordingThings To Know Before You Start Recording Check the recording direction for the tapeCD Direct Recording One Track RecordingTo Stop at Any Time During the Recording Process Recording an AM station to tapeUsing External Equipment Setting the Daily Timer Using the TimersSetting the Clock Setting the Sleep Timer Setting the volume levelPress the TIMER/SNOOZE button on Unit Minute SnoozingCare And Maintenance Troubleshooting SymptomPossible Cause ActionSpecifications EN, GE, FR, NL, SP, IT, SW 0699MNMCREJSC