Impex MWB CR 4 manual Diagram

Page 10

STEP 5 (See Diagram 5)

A.) Insert the Chromed Adjustment Tube (#20) into the Leg Press Frame (#19). Secure it with a Quick Release Pin (#62).

B.) Attach the Foot Plate (#21) to the Chromed Tube (#20) and secure it with a L-Shaped Pin (#112). C.) Attach the Bench Press Frame (#11) to the pivot tube on the Right Base Frame (#1). Insert a M10 x 8 5/8” Axle (#82) through the holes. Secure it with two ¾” Washers (#106) and M10 Aircraft

Nuts (#110) on both sides. Close the ends with two Round Caps (#108).

D.) Attach two Bench Press Handles (#12) to the Bench Press Frame (#11). Secure them with two Quick Release Pins (#62).

E.) Attach the Seat (#40) to the Seat Support Frame (#14). Secure it with two 5/8” Washers (#107) and M8 x 2 ½” Allen Bolts (#101).

F.) Attach the Backrest Board (#41) to the Right Vertical Beam (#3). Secure it with two 5/8” Washers (#107) and M8 x 2 ½” Allen Bolts (#101).

DIAGRAM 5

9

Image 10
Contents Marcy Corner GYM Toll-Free Customer Service Number Important Safety Notice Page Diagram See Diagram Page Diagram Diagram Diagram Diagram Diagram Diagram See Diagram 9 See Diagram 10 See Diagram 11 Page See Diagram 12 See Diagram 13 See Diagram 14 Page Parts List ’tyPage HOW to USE Impex INC