STEP 3 (See Diagram 3)
A.) Slide the Sliding Weight Post (#10) onto the Rear Vertical Frame (#6) from top. Make sure the triangular cable connecting bracket faces up.
B.) Insert the open bracket on the Upper Frame (#9) into top of the Front Vertical Frame (#8). Secure them with two M10 x 5/8” Allen Bolts (#80), and two Ø 3/4” Washers (#84). Do not tighten the Bolts yet.
C.) Attach the rear of Upper Frame to the Rear Vertical Frame. Secure them together with two M10 x 2 3/8” Allen Bolts (#76) and two Ø ¾” Washers (#84). Securely tighten all Bolts in
Procedure B & C.
D.) Slide two Olympic Sleeves (#65) onto the posts on Sliding Weight Post. Attach a Spring Clip (#44) onto each Sleeve.
8