Impex MD-3400 manual Aircraft Nuts #91

STEP 3 (See Diagram 3)

A.)	Attach the Front Press Base (#2) to the Upper Frame (#1). Secure it with one 6
	¾” Front Press Base Axle (#29), two Ø 1 ¼” Washers (#59), and two M10
	Aircraft Nuts (#91).
B.)	Attach the Front Press (#3) to the Front Press Base (#2). Secure it with one 7
	½” Front Press Axle (#30), two Ø1 ¼” Washers (#59), and two M10 Aircraft
	Nuts (#91).
C.)	Thread the T-shaped Lock Pin (#39) into the hole on the Front Press to obtain
	the desired Front Press position.
D.)	Attach the Backrest Board (#31) to the Backrest Support Frame (#5). Secure it
	with two M8 x 1 5/8” Allen Bolts (#86) and Ø 5/8” Washers (#88).
E.)	Attach the Backrest Support Frame to the Vertical Frame (#4). Secure it with
	one M10 x 4 3/8” Allen Bolt (#80), two ∅ ¾” Washers (#92), and one M10
	Aircraft Nut (#91).
F.)	Thread the Long T-shaped Lock Pin (#38) into the hole on the side of the
	Vertical Frame to obtain the desired Backrest position.

10