Impex MD-3400 manual Diagram

Page 14

STEP 5 (See Diagram 5)

A.) Slide the Right Butterfly (#10) onto the right axle on the Butterfly Base (#13).

B.) Insert the Butterfly Handle (#9) into the pivot on the Right Butterfly. Secure it with one M10 x ¾” Allen Bolt (#78) and 1 ¼” Washer (#59) from the bottom.

C.) Repeat Procedures A and B above to install the other side. Do not over tighten the Bolts. Make sure the Handles are able to swivel.

DIAGRAM 5

13

Image 14
Contents Marcy Diamond Elite Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Page Hardware Pack Hardware Pack Hardware Pack Assembly Instruction Diagram Diagram Aircraft Nuts #91 Diagram Diagram Diagram Cable Loop Diagram See Diagram 6 & Upper Cable Loop Diagram Diagram Upper Cable Loop Diagram See Diagram 7 & Lower Cable Loop Diagram Diagram Lower Cable Loop Diagram See Diagram 8 & Butterfly Cable Loop Diagram Diagram Butterfly Cable Loop Diagram See Diagram Diagram Weight Resistance Chart Parts List ’tyImpex INC Info@impex-fitness.com