JVC UX-S57 Listening to FM and AM MW Broadcasts, Tuning in to a Station, Presetting Stations

Page 16

Listening to FM and AM (MW) Broadcasts

Tuning in to a Station

1 Press FM/AM to select either “FM” FM/AM or “AM.”

The unit automatically turns on and tunes in to the previously received station—either FM or AM (MW).

•Each time you press the button, the band alternates between FM and AM (MW).

Presetting Stations

You can preset 30 FM and 15 AM (MW) stations manually.

In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.

2 Press and hold ¢ or 4 (or ¢ UP or 4 DOWN on the unit) for more than 1 second.

•¢ (¢ UP): Increases the frequencies.

•4 (4 DOWN): Decreases the frequencies.

The unit starts searching for stations and stops when a station of sufficient signal strength is tuned in.

•If an FM program is broadcast in stereo, the STEREO indicator lights up on the display (only when the reception is good).

To stop during searching, press ¢ or 4 (or ¢ UP or

4DOWN on the unit).

On the remote control ONLY:

1 Tune in to the station you want to preset.

• See “Tuning in to a Station.”

2 Press SET.

SET

 

“SET” starts flashing on the display.

3 Press DISC UP or DISC

DISC UP

 

DOWN to select a preset number.

 

 

DISC DOWN

When you repeatedly press ¢ or 4 (or ¢ UP or 4 DOWN on the unit)

The frequency changes step by step.

To change the FM reception mode

On the remote control ONLY:

When an FM stereo broadcast is hard to receive

FM

or noisy, press FM MODE so that the MONO

MODE

 

indicator lights up on the display. Reception will

 

improve.

 

To restore the stereo effect, press FM MODE again so that the MONO indicator goes off. In stereo mode, you can hear stereo sound when a stereo program is broadcast.

You can also select the preset number using the number buttons.

Ex.: For preset number 5, press 5. For preset number 15, press +10,

then 5.

For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

1 2 3

4 5 6

7 8 9

10+10

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Instructions Important for Laser Products Above ALL Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsFront panel Display window on the front panel Display windowRemote Control See pages in parentheses for detailsConnecting Antennas Before connecting it, disconnect the supplied FM antennaGetting Started UnpackingConnecting Speakers Release your finger from the clampAM MW antenna To connect speakersConnecting Other Equipment Putting the Batteries into the Remote ControlTo remove the speaker grilles To connect audio equipmentSetting the Clock On the remote control onlyOn the remote control only Press CLOCK/TIMER Press Disc UP or Disc Down to adjust the minute, then pressTurning On the Power To turn off the unit automatically Auto StandbyAdjusting the Volume On the remote controlReinforcing the Bass Sound On the unitAdjusting the Tone Changing the Display BrightnessPresetting Stations Tuning in to a StationListening to FM and AM MW Broadcasts Press SET again Tuning in to a Preset StationStored appears on the display for a while Changing the RDS Information Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search Switching Temporarily to a Program Type of Your Choice Type you want flashes on the displayWait for about 3 seconds after specifying the data type To activate the Enhanced Other Networks functionWhen playing CD-Rs or CD-RWs About the disc indicatorsPlaying Back Discs on the 5-CD Changer Loading DiscsPlaying Back All the Entire Discs -Continuous Play To go to another track directly using the number buttons Basic Disc OperationsTo select a group or track before playback MP3 discs only To locate a particular point in a track during playPrograming the Track Playing Order -Program Play Playing at Random-Random Play Repeating Tracks or Discs-Repeat PlayProhibiting Disc Ejection CD Random appears on DisplayUsing the Timers Using the Daily TimerPress STANDBY/ON to turn off Unit if the unit is on Adjust the clock if neededPlay Using the Sleep Timer On the remote control only Press SleepHow the Sleep Timer actually works Sleep indicator lights up on the displayMaintenance Cleaning the unitTo clean the disc Stains on the unitSymptom Possible Cause TroubleshootingAction Additional Information Description of the PTY codesSpecifications UX-S57 Micro Component System

UX-S57 specifications

The JVC UX-S57 is a sophisticated compact stereo system that seamlessly combines modern audio technology with a sleek design, appealing to music enthusiasts and casual listeners alike. Known for its rich sound quality, the UX-S57 stands out with a host of features that elevate the listening experience.

At the heart of the JVC UX-S57 is the powerful amplifier, which delivers an impressive output, ensuring that music is reproduced with clarity and depth. The system is equipped with two-way speaker systems that enhance sound dispersion and create a fuller acoustic presence, making it suitable for both small and medium-sized rooms.

One of the defining features of the UX-S57 is its MP3 and WMA playback capabilities, enabling users to enjoy their favorite audio files from a variety of sources. The integrated CD player supports various disc formats, offering versatility for music lovers who still enjoy traditional media. For those who prefer a more contemporary approach, the system includes USB connectivity, allowing quick access to digital music files stored on USB flash drives.

The JVC UX-S57 also supports Bluetooth technology, which facilitates wireless streaming from smartphones, tablets, and other Bluetooth-enabled devices. This feature adds significant convenience, enabling users to enjoy their playlists without the hassle of cables.

Another noteworthy technology highlighted in the UX-S57 is the inclusion of a digital tuner with preset memory functions, offering access to numerous FM radio stations. This is a fantastic addition for those who still appreciate traditional radio broadcasting.

The system’s design is sleek and modern, featuring an easy-to-read LCD display that provides essential information such as track number and playback time. The intuitive controls enhance usability, making it straightforward to navigate through various functions and settings.

The JVC UX-S57 is also equipped with advanced sound enhancement technologies, such as a built-in equalizer that allows users to customize audio output based on their preferences. Various preset sound modes cater to different genres, ensuring that the music is always presented in the best possible way.

In summary, the JVC UX-S57 is a versatile compact stereo system that excels in providing an exceptional audio experience. With its combination of modern technology, stylish design, and user-friendly features, it's an excellent choice for anyone looking to elevate their home audio setup. Whether for casual listening or more immersive experiences, the UX-S57 caters to a broad range of audio needs, making it a worthy addition to any music lover's collection.
Top Page Image Contents