JVC UX-S57 manual Playing Back All the Entire Discs -Continuous Play

Continued

Playing Back All the Entire Discs —Continuous Play

You can play discs continuously.

1 Load discs into the 5-CD Changer.

2 Select a disc to play.

On the remote control:

1) Press 3/8 CD, then 7.	3/8
	CD
2) Press DISC UP or	DISC	DISC UP
DOWN to select the disc you
want.
		DISC DOWN
On the unit:
Press DISC SELECT repeatedly to		DISC
select the disc you want.		SELECT
		CD
3 Press 3/8 CD.		CD
		3/8
Playback starts from the first track of the
selected disc.

Ex. When an audio CD is played back.

Current track number

1 2 3 4 5

CD

Elapsed playing time

Ex. When an MP3 disc is played back.

Current group number Current track number

1 2 3 4 5

CD

ID3 tag information and group/file name

•Without selecting the disc number, pressing 3/8 CD starts playing back from the currently selected disc.

To stop play for a moment, press 3/8 CD.	3/8
While pausing, the elapsed playing time flashes	CD
on the display.
To resume play, press 3/8 CD again.

To stop during play, press 7.

To remove discs, press the corresponding disc eject buttons (CD10 – CD50) on the unit.

To start Continuous Play while a source other than “CD” is selected

On the unit ONLY:

Press DISC SELECT repeatedly to select a disc,	DISC
then press #/8 CD.	SELECT
• Each time you press DISC SELECT before	CD
#/8 CD, the disc tray number changes.
	DISC
	SELECT
	CD
Disc tray number

Disc playback sequence in the 5-CD Changer

When 5 discs are loaded on the disc trays*, they are played in the following sequence:

Ex.: When playback is started from the CD 2 tray:

CD 2 ] CD 3 ] CD 4 ] CD 5 ] CD 1 (then stops)

* If no disc is on the disc tray, 5-CD Changer skips that tray.

While playing back an MP3 disc

ID3 Tag information (the name of the title, artist, and album) and group/file name will be shown on the display. When the name is too long to be displayed at once, it is scrolled.

18