STEP 8 (See Diagram 8 & Cable Loop Diagram)
A.) Attach one end of the 118” Butterfly Cable (#42) to the hook on the Right Butterfly (#21). Draw the Cable to the right open Swivel Pulley Bracket (#26).
B.) Attach a Pulley (#60) to the Bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#82), two ∅ ¾” Washers (#94), and one M10 Aircraft Nut (#97).
C.) Draw the Cable around the Pulley then downward. Repeat Step B above to install a Pulley to the Angled Double Floating Pulley Bracket (#27). Let the Bracket hanging for now. Draw the Cable upward to the left open Swivel Pulley Bracket.
D.) Repeat Step B above to install another Pulley to the left Swivel Pulley Bracket. Draw the Cable around the Pulley to the Left Butterfly (#20). Attach the end of the Cable to the hook on the Left Butterfly.
DIAGRAM 8
17