STEP 13 (See Diagram 13)
A.) Attach a Backrest Board (#38) to the Right Vertical Beam (#3). Secure it with two M8 x 2 1/8” Allen Bolts (#89) and Ø 5/8” Washers (#93).
B.) Attach a Seat Pad (#37) onto the Right Seat Support (#2). Secure it with two M8 x 2 1/8” Allen Bolts (#89) and Ø 5/8” Washers (#93).
C.) Attach the Arm Curl Pad (#39) to the Arm Curl Stand (#6). Secure it with two M8 x 5/8” Allen Bolts (#88) and Ø 5/8” Washers (#93).
D.) Insert the Arm Curl Stand into the opening on the Right Seat Support and secure it with a Lock Knob (#53).
DIAGRAM 13
24