STEP 16 (See Diagram 16)
A.) Connect the Lat Bar (#5) to the 180” Upper Cable (#40) with two
B.) Connect the Abdominal Strap (#99) to the Cable Head Connector (#45) with a
C.) Insert two Foam Tubes (#30) halfway through the holes on the Right Seat Support (#2) and Leg Developer (#7). Push four Foam Rolls (#48) onto the Tubes form both sides. Plug four Foam Roll End Caps (#62) into the ends.
D.) Connect the Arm Curl Handle (#8) to the 105” Lower Cable (#41) with a Long Chain (#73) and two
DIAGRAM 16
27