English

SHARK THRESHER

S4	S1
S3	S2

S1. Set/recall button

S2. Start/lap button

S3. Mode button

S4. Light/stop/reset button

DISPLAY MODES:

The watch has four display modes: HOME TIME (T1) / FOREIGN TIME (T2), ALARM, CHRONOGRAPH (CHRONO) and TIMER.

To change from one display mode to another, press S3 button once.

NOTE: In any setting mode, when there is no button pressed for approximately 150 seconds, the watch will automati- cally save the entered data and exit the setting procedure.

HOME AND FOREIGN TIME DISPLAY:

To display FOREIGN TIME mode, press and hold S2 button when HOME TIME mode is displayed. The mode descrip- tion (T2) will be displayed and blink for approximately 5 seconds before switching to FOREIGN TIME mode. To change back to HOME TIME mode, press and hold S2 button again.

TO SET THE TIME AND CALENDAR:

1.Press S3 button to select HOME TIME / FOREIGN TIME mode.

2.Press and hold S1 button, the message “HOLD TO SET” will be displayed for approximately 3 seconds and the time zone setting will blink.

4.Press S2 or S4 button to toggle between HOME TIME (TIME 1) and FOREIGN TIME (TIME 2) to set.

5.Press S3 button, the hour digits will blink. Press S2 button to increase or S4 button to decrease the value. Holding down the button will speed up the process.

6.Press S3 button, the minute

digits will blink. Press S2 button to increase or S4 button to decrease

the value. Holding down the button will speed up the process.

7.Press S3 button, the second digits will blink. Press S2 or S4 button to reset the second digits to zero.

8.Press S3 button, the day (of the week) will blink. Press S2 or S4 button to cycle forward or backward through the 7 days.

9.Press S3 button, the month digits will blink. Press S2 button to in- crease or S4 button to decrease the value. Holding down the button will speed up the process.

10.Press S3 button, the date digits will blink. Press S2 button to increase or S4 button to decrease the value. Holding down the button will speed up the process.

11.Press S3 button, the hour format setting will blink. Press S2 or S4 button to toggle between 12-hour and 24-hour format. The A.M. (A) or P.M. (P) indicator may be displayed to indicate the time period 12:00 A.M. – 11:59 A.M. or 12:00 P.M. – 11:59 P.M. respectively in 12-hour format.

12.Press S3 button, the calendar format setting will blink. Press

S2 or S4 button to toggle between month-date (MM-DD) and date- month (DD-MM) format.

13.Press S3 button, the hourly chime (CHIME) setting will blink. Press

S2 or S4 button to toggle between ON and OFF for the hourly chime setting.

14.Press S3 button, the “BEEP” setting will blink. The “BEEP” option will cause the watch to beep anytime a button is pressed. Press S2 or S4 button to toggle between ON and OFF for the beep setting.

15.When finished making all the set- tings, press S1 button to confirm.

NOTE: The hourly chime and beep settings will apply to both HOME TIME mode and FOREIGN TIME mode.

TO SET THE ALARM TIME:

1.Press S3 button to select ALARM mode.

2.Press S1 button, the message “SET” will be displayed and the hour digits will blink. Press S2 button to increase or S4 button to decrease the value. Holding down the button will speed up the process.

3.Press S3 button, the minute digits will blink. Press S2 button to in- crease or S4 button to decrease the value. Holding down the button will speed up the process.

4.Press S3 button, the A.M. (AM) or P.M. (PM) indicator will blink. Press S2 or S4 button to toggle between A.M. and P.M.

5.Press S3 button, the alarm frequen- cy setting will blink. Press S2 or S4 button to cycle forward or backward through daily (DAILY), weekdays only (WKDAYS) and weekends only (WKENDS).

6.When finished making all the set- tings, press S1 button to confirm.

NOTE: The A.M. / P.M. setting is avail- able only when 12-hour format is se- lected for the HOME TIME / FOREIGN TIME mode currently displayed.

NOTE: The alarm will automatically be activated after being set.

TO TURN ON/OFF THE ALARM:

In ALARM mode, press S2 button to toggle between ON and OFF for the alarm. When the alarm is ON, the

alarm indicator will appear.

WHEN AN ALARM GOES OFF:

A 20-second alarm tune will be emitted at the designated time when the alarm is activated. To stop the tune, press any button.

If the alarm tune is done without any user interruption, the watch will au- tomatically enter a snooze mode. The alarm will go off again after 5 minutes but for only once.

TO USE CHRONOGRAPH:

1.Press S3 button to select CHRONO- GRAPH mode.

2.The chronograph will then be dis- played in its current state – stopped, running, or reset.

3.To resume a stopped counting, press S2 button to resume from where

it left off.

4.To start a new counting, reset the chronograph to zero first.

Press S4 button to stop counting, then press and hold S4 button. The message “HOLD TO RESET” will be displayed for approximately 2 sec- onds and the counter will be reset to zero.

For changing the chronograph display format:

In CHRONOGRAPH mode,

1.Make sure the chronograph is in the reset state and there is no previous lap record.

2.Press S1 button, the message “FORMAT” will be displayed for approximately 2 seconds and the