JVC MX-K50, SP-MXK50 manual Common Operations

English

Common Operations

Turning On or Off the Power	3 Press 4 or ¢ to adjust the
	minute, then press SET.

To turn on the unit, press STANDBY/ ON so that the STANDBY lamp goes off.

To turn off the unit (on standby), press

STANDBY/ON again so that the STANDBY lamp lights up.

STANDBY

STANDBY/ON

SET

STANDBY

STANDBY/ON

A little power is always consumed even while the unit is on standby.

To switch off the power supply completely, unplug the AC

power cord from the AC outlet.

When you unplug the AC power cord or if a power failure occurs

The clock is reset to “– – : – –” soon, while the tuner preset stations (see page 12) will be erased in a few days.

Setting the Clock

Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.

To check the clock time

Press DISPLAY while playing any source. DISPLAY

•Each time you press the button, the source indication and the clock time alternate on the display.

To adjust the clock again

If you have adjusted the clock before, you need to press CLOCK/TIMER repeatedly until “CLOCK” is selected.

•Each time you press the button, the clock/timer setting modes change as follows:

DAILY ON TIME REC

(Daily Timer)

Canceled CLOCK ON TIME

(Recording Timer)

If there is a power failure

The clock loses the setting and is reset to “– – : – –.” You need to set the clock again.

On the unit ONLY:

1	Press CLOCK/TIMER.	CLOCK
		/TIMER

The hour digits start flashing on the display.

2 Press 4or ¢ to adjust the hour, then press SET.

The minute digits start flashing on the display. SET

• If you want to correct the hour after pressing SET, press CANCEL/DEMO. The hour digits start flashing again.

– 9 –