JVC MX-K50, SP-MXK50 manual Playing Back CDs

Page 50

English

.

Playing Back CDs

This unit has been designed to playback the following CDs: Audio CD, CD-R, and CD-RW.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already

“finalized.”

You can play back your original CD-Rs or CD-RWs recorded in music CD format ONLY. (If CD-RWs have been recorded in different format, erase all the data on CD-RWs completely before re-recording on the discs.)

DO NOT play back CD-Rs or CD-RWs

3 If you wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the remote control.

The disc tray rotates by 120˚.

4 Press 0 again.

The carrousel closes.

About the disc indicators

DISC CHANGE

DISC

SKIP

recorded the sound files such as MP3.

Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

Important notices:

In general, you will have the best performance by keeping your CDs and the mechanism clean.

-Store CDs in their cases, and keep them in cabinets or on shelves.

-Keep the unit’s carrousel closed when not in use.

Continuous use of irregular shaped discs (heart-shape, octagonal, etc.) can damage the disc rotating mechanism.

CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than for regular CDs.

Each disc indicator corresponds to the disc tray of the same number.

Disc number

Disc indicator

Disc marker

The disc marker lights up for the disc number you have selected.

The disc indicator rotates while the corresponding CD is being played.

The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

Playing Back CDs—All Disc and One Disc

You can play all loaded CDs continuously—All Disc play, or one selected disc—One Disc play.

All Disc play

Loading CDs

1 Press 0.

The unit automatically turns on and the carrousel comes out.

2 Place one or two discs correctly on the front recesses of the disc tray, with its label side up.

CORRECT

INCORRECT

1 Load CDs.

If the current playing source is not the CD player, press CD 6, then 7 before going to the next step.

2 Press REPEAT repeatedly so that the REPEAT PROG

ALL DISC indicator lights up on the display.

Track number of the currently playing disc flashes (Track numbers exceeding 16 are not displayed.)

• When using a CD single (8 cm), place it on the inner

 

 

 

Track number

 

Elapsed playing time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recess of the disc tray.

• Each time you press the button, the indication on the

 

 

display changes as follows:

 

 

 

 

 

 

 

 

 

 

ALL DISC

 

1 DISC

 

REPEAT 1*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(initial setting)

 

 

 

 

 

 

 

 

 

 

 

 

 

REPEAT ALL DISC*

 

 

REPEAT 1 DISC*

 

 

 

 

 

 

 

 

 

 

* See page 16.

 

 

 

 

 

 

 

 

 

 

– 13 –

Image 50
Contents MX-K50 Disconnect the mains plug to shut the power off com English CA-MXG50 Class Laser Product About This Manual PrecautionsIntroduction Contents Location of the Buttons and Controls Front PanelFront Panel Display windowRemote Control Remote ControlUnpacking Connecting AntennasGetting Started AM antenna Connecting SpeakersRelease the finger from the clamp To connect an outdoor AM antennaAdjusting the Voltage Selector Connecting Other EquipmentCanceling the Display Demonstration On the unit onlyCommon Operations Turning On or Off the PowerSetting the Clock Selecting the Sources Setting the AM Tuner Interval Spacing Adjusting the VolumeTo turn down the volume level temporarily To select the external equipment as the source, press AUXReinforcing the Bass Sound Selecting the Sound ModesPresetting Stations Tuning in a StationTuning in a Preset Station Listening to the RadioLoading CDs Playing Back CDsPlaying Back CDs-All Disc and One Disc Basic CD Operations Programing the Playing Order of the Tracks --Program Play Prohibiting Disc Ejection--Tray Lock Playing at Random--Random PlayRepeating Tracks or CDs--Repeat Play Appears on the displayPress Eject 0 for the deck you want to use Playing Back TapesPlaying Back a Tape Close the cassette holder gentlyRecording a Tape on Deck B To clean the head, capstan, and pinch rollerRecording On the unit only Press Tape 3, then Dubbing TapesCD Synchronized Recording To stop during CD Synchronized Recording, pressControl repeatedly Using the MicrophonesSinging Along-Karaoke Connect the microphone Press CD 3/8, thenUsing the Timers Using Daily TimerUsing Recording Timer Using Sleep Timer Timer PriorityHandling discs MaintenanceCleaning the unit Handling cassette tapesTroubleshooting SymptomSpecifications 127 Manual DE Instrucciones Instruções Page English Español Português Precaución el aparato debe estar bien ventilado Class 1 Laser Product Producto Láser Clase Introduction Contents Clock Timer Display Front Panel Remote Control Getting Started Connecting Speakers 127 Common Operations Setting the AM Tuner Interval Spacing Adjusting the Volume Reinforcing the Bass Sound Listening to the Radio Playing Back CDs Basic CD Operations Program appears on Playing at Random--Random Play Playing Back Tapes Stop REC Start Dubbing Tapes Using the Microphones Using the Timers Using Recording Timer Sleep Maintenance Troubleshooting CD Capacity Importante para la línea de la red CA

MX-K50, SP-MXK50 specifications

The JVC SP-MXK50 and MX-K50 are compact audio systems designed to deliver high-quality sound in a stylish and user-friendly package. These models epitomize JVC's commitment to combining innovative technology with practical design, catering to various audio needs for both casual listeners and serious audiophiles.

At the core of the SP-MXK50 and MX-K50 is a powerful amplifier that enhances audio performance, ensuring that every note and beat is delivered with clarity and precision. The systems feature dual 20-watt speakers, which create an immersive sound experience, allowing users to enjoy music, movies, and more with rich audio depth. The tweeters and woofers are engineered to reproduce a wide frequency range, making them suitable for various genres of music.

One of the standout features of these models is their versatility in connectivity. They come equipped with multiple input options, including a CD player, USB port, and auxiliary input. This allows for easy connection with various devices, whether it's a smartphone, tablet, or traditional CD player. Additionally, with Bluetooth connectivity, users can stream music wirelessly from their devices, making it convenient to enjoy their favorite tunes without the hassle of cables.

The JVC MX-K50 also incorporates a digital radio tuner, enabling users to access their favorite FM/AM stations with ease. The system includes programmable presets, allowing quick access to the most listened-to stations. This feature adds an element of convenience for those who enjoy radio broadcasts.

A unique aspect of these models is their sleek design. The compact size makes them ideal for small spaces, and the modern aesthetic complements any room decor. The control panel is intuitively designed, making it easy for users to navigate through various functions and settings, ensuring a hassle-free experience when adjusting audio preferences.

Additionally, the JVC SP-MXK50 and MX-K50 include EQ settings, allowing users to tailor the sound according to their personal preferences. This customization feature enhances the listening experience, enabling individuals to optimize the audio output based on the type of music or content they are enjoying.

In summary, the JVC SP-MXK50 and MX-K50 offer a blend of powerful audio performance, versatile connectivity options, and user-friendly features in a compact design. These systems are an excellent choice for anyone looking to elevate their audio experience at home or on the go, making them a worthwhile investment for music lovers and entertainment enthusiasts alike.