JVC MX-K50, SP-MXK50 manual Using the Timers

Page 58

English

Using the Timers

There are three timers available—Daily Timer, Recording

2 Press CLOCK/TIMER again.

/TIMER

Timer, and Sleep Timer.

 

 

CLOCK

Before using the timers, you need to set the clock built in the

“ON TIME” appears for 2 seconds, then the

 

unit enters on-time setting mode.

 

unit. (See “Setting the Clock” on page 9.)

 

 

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

Daily Timer works every day unless you cancel it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using a CD as the source to play:

—Make sure there is a CD on the currently selected disc number tray.

•When using a tape as the source to play:

—Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•When using the external component as the source to play:

—Set the timer equipped with the external component at the same time.

On the unit ONLY:

 

1 Press CLOCK/TIMER repeatedly

/TIMER

 

CLOCK

until “DAILY” appears on the

 

display.

 

indicator lights up and the DAILY (daily timer) indicator starts flashing on the display.

•Each time you press the button, the clock/timer setting modes change as follows:

DAILY ON TIME REC

(Daily Timer)

Canceled CLOCK ON TIME

(See page 9.) (Recording Timer)

3 Set the on-time you want the unit to turn on. 1) Press 4 or ¢ to set the hour, then

press SET.

2) Press 4 or ¢ to set the minute, then press SET.

SET

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1) Press 4 or ¢ to set the hour, then press SET.

2)Press 4 or ¢ to set the minute, then press SET.

The unit enters source selecting mode.

SET

5 Press 4 or ¢ to select the source to play, then press SET.

• Each time you press 4 or ¢, the source changes as follows:

TUNER FM TUNER AM

SET

AUX TAPE CD

TUNER FM : tunes in to a specified preset FM station.

=go to step 6.

TUNER AM : tunes in to a specified preset AM station.

 

= go to step 6.

CD

: plays a disc from the first track.

 

= go to step 7.

TAPE

: plays a tape in deck A or B.

 

= go to step 7.

AUX

: plays an external source.

 

= go to step 7.

– 21 –

Page 57 Page 59
Image 58
Page 57 Page 59
Contents MX-K50 Disconnect the mains plug to shut the power off com English CA-MXG50 Class Laser Product Introduction PrecautionsAbout This Manual Contents Location of the Buttons and Controls Front PanelFront Panel Display windowRemote Control Remote ControlGetting Started Connecting AntennasUnpacking AM antenna Connecting SpeakersRelease the finger from the clamp To connect an outdoor AM antennaAdjusting the Voltage Selector Connecting Other EquipmentCanceling the Display Demonstration On the unit onlySetting the Clock Turning On or Off the PowerCommon Operations Selecting the Sources Setting the AM Tuner Interval Spacing Adjusting the VolumeTo turn down the volume level temporarily To select the external equipment as the source, press AUXReinforcing the Bass Sound Selecting the Sound ModesPresetting Stations Tuning in a StationTuning in a Preset Station Listening to the RadioPlaying Back CDs-All Disc and One Disc Playing Back CDsLoading CDs Basic CD Operations Programing the Playing Order of the Tracks --Program Play Prohibiting Disc Ejection--Tray Lock Playing at Random--Random PlayRepeating Tracks or CDs--Repeat Play Appears on the displayPress Eject 0 for the deck you want to use Playing Back TapesPlaying Back a Tape Close the cassette holder gentlyRecording To clean the head, capstan, and pinch rollerRecording a Tape on Deck B On the unit only Press Tape 3, then Dubbing TapesCD Synchronized Recording To stop during CD Synchronized Recording, pressControl repeatedly Using the MicrophonesSinging Along-Karaoke Connect the microphone Press CD 3/8, thenUsing the Timers Using Daily TimerUsing Recording Timer Using Sleep Timer Timer PriorityHandling discs MaintenanceCleaning the unit Handling cassette tapesTroubleshooting SymptomSpecifications 127 Manual DE Instrucciones Instruções Page English Español Português Precaución el aparato debe estar bien ventilado Class 1 Laser Product Producto Láser Clase Introduction Contents Clock Timer Display Front Panel Remote Control Getting Started Connecting Speakers 127 Common Operations Setting the AM Tuner Interval Spacing Adjusting the Volume Reinforcing the Bass Sound Listening to the Radio Playing Back CDs Basic CD Operations Program appears on Playing at Random--Random Play Playing Back Tapes Stop REC Start Dubbing Tapes Using the Microphones Using the Timers Using Recording Timer Sleep Maintenance Troubleshooting CD Capacity Importante para la línea de la red CA

MX-K50, SP-MXK50 specifications

The JVC SP-MXK50 and MX-K50 are compact audio systems designed to deliver high-quality sound in a stylish and user-friendly package. These models epitomize JVC's commitment to combining innovative technology with practical design, catering to various audio needs for both casual listeners and serious audiophiles.

At the core of the SP-MXK50 and MX-K50 is a powerful amplifier that enhances audio performance, ensuring that every note and beat is delivered with clarity and precision. The systems feature dual 20-watt speakers, which create an immersive sound experience, allowing users to enjoy music, movies, and more with rich audio depth. The tweeters and woofers are engineered to reproduce a wide frequency range, making them suitable for various genres of music.

One of the standout features of these models is their versatility in connectivity. They come equipped with multiple input options, including a CD player, USB port, and auxiliary input. This allows for easy connection with various devices, whether it's a smartphone, tablet, or traditional CD player. Additionally, with Bluetooth connectivity, users can stream music wirelessly from their devices, making it convenient to enjoy their favorite tunes without the hassle of cables.

The JVC MX-K50 also incorporates a digital radio tuner, enabling users to access their favorite FM/AM stations with ease. The system includes programmable presets, allowing quick access to the most listened-to stations. This feature adds an element of convenience for those who enjoy radio broadcasts.

A unique aspect of these models is their sleek design. The compact size makes them ideal for small spaces, and the modern aesthetic complements any room decor. The control panel is intuitively designed, making it easy for users to navigate through various functions and settings, ensuring a hassle-free experience when adjusting audio preferences.

Additionally, the JVC SP-MXK50 and MX-K50 include EQ settings, allowing users to tailor the sound according to their personal preferences. This customization feature enhances the listening experience, enabling individuals to optimize the audio output based on the type of music or content they are enjoying.

In summary, the JVC SP-MXK50 and MX-K50 offer a blend of powerful audio performance, versatile connectivity options, and user-friendly features in a compact design. These systems are an excellent choice for anyone looking to elevate their audio experience at home or on the go, making them a worthwhile investment for music lovers and entertainment enthusiasts alike.
Top Page Image Contents