Cadence T1 manual Alarm Mode, Backlight, Installing the Watch Band, Specifications & Warranty

Page 2

**In order for the internal tilt-switch to register a stroke, the watch must rotate 90°. For consistent and accurate stroke rate readings, the Cadence should be pointing straight up (toward the sky) when the blade is 1/2 feathered. This allows the watch to rotate enough to activate the tilt switch with each square and feather.

You may need to adjust the placement of the watch slightly in order for the tilt switch to register and the watch to be positioned such that it is easily read. If you are getting rates that do not seem to be correct, or the watch is not registering any rates at all, try sliding the watch on the handle slightly to ensure that the tilt switch is engaging fully.

3.)

Band Loop

 

4.)

 

 

 

Watch

Band Loop

 

 

 

 

 

Velcro

Band Opening

 

 

 

 

Velcro

Watch

 

 

 

 

 

 

 

Band Opening

 

 

 

 

Watch

Watch

Band Opening

Band Opening

 

ALARM MODE

The Cadence T1 has an alarm that can be set to go off daily or one-time only. When the alarm is set, the alarm icon will always be displayed on the screen, no matter what mode the watch is in.

Illuminate

Increase

Alarm icon

 

Backlight

(indicates that

 

Setting

Indicates

 

alarm is ON)

 

 

 

 

 

 

 

AM or PM

 

Advance to

 

 

 

Time

 

 

 

 

 

Next Setting

 

 

 

of Alarm

 

Decrease

 

 

 

Indicates if

Enter & Exit

Setting

 

 

 

 

 

 

Alarm is set

Mode

 

 

 

 

 

 

 

 

Once or Daily

To set the alarm:

 

 

 

 

 

1. Press the Mode

The watch will display the time and type of alarm: once or daily.

button to enter the

 

 

 

 

 

Alarm mode.

 

 

 

 

 

2. Hold the Set button

“HOLD TO SET” will be displayed, with a beep.

 

for 3 seconds.

 

 

 

 

 

3. Press the + and -

The value that is to be adjusted will blink. Hold the + and - buttons to

buttons to adjust the

adjust the value quickly.

 

 

 

 

value and the >>

 

 

 

 

 

button to move to the

 

 

 

 

 

next value.

 

 

 

 

 

4. Press the + or -

Choose between Daily and Once. If Daily is selected, the alarm will go

buttons to choose the

off every day at that time when the alarm is active. If Once is selected,

type of alarm.

the alarm will go off one time and then become inactive.

 

 

 

 

 

 

5. Press the Mode

 

 

 

 

 

button to return to

 

 

 

 

 

Alarm mode.

 

 

 

 

 

6. From Alarm mode,

When the alarm sounds, the watch will beep for 30 seconds. Press any

press the + or - button

button while the alarm is beeping to turn it off.

 

to turn the alarm on or

 

 

 

 

 

off.

 

 

 

 

 

 

 

 

 

 

 

BACKLIGHT

Press the LIGHT button to illuminate the backlight for 5 seconds. If the LIGHT button is pressed again while the backlight is illuminated,the backlight will turn off.Additionally,if any other button is pressed while the backlight is on, the 5-second backlight timer will be restarted.

INSTALLING THE WATCH BAND

The Cadence T1 comes with a black neoprene EZ-Wrap band. Accessory bands come in a variety of colors. The band is designed to fit most wrist sizes, as well as sweep and sculling oar handles. Install the band as illustrated below:

SPECIFICATIONS & WARRANTY

·The Cadence T1 uses one lithium CR2032 battery. Battery life estimated 1.5 years (with 3 x per day backlight use, 1 x per day alarm). NK strongly suggests taking your Cadence to a jeweler or retailer (including NK) to replace the battery.

·The Cadence T1 is guaranteed against defects in materials and workmanship for 2 years from the date of purchase. This warranty does not cover: damage due to improper use or neglect (including corrosion), impact damage, modifications or attempted repairs by someone other than an authorized NK repair agent, normal wear and tear or failed batteries. Beyond the two warranty years, the Cadence T1 is covered by NK’s Customer Care Lifetime warranty.See NK’s complete warranty policy at: http://www.nkhome.com/support/rowwarranty.html.

·Electroluminescent green backlight, 5-second duration.

·Stainless steel bezel and case back, rugged rubberized housing, shatter-resistant plastic crystal.

·Black EZ-WRAP neoprene band with hook and loop closure - 10" (25 cm) length accommodates small to large wrists and sculling blades to large sweep oars.

·Customize with accessory EZ-Wrap straps: red, orange, yellow, dark green, lime green, baby blue,navy blue,purple,burgundy,pink,gray.

·Water resistant to 5 atm/50m (ISO-2281 standard).

·US Patent number 6,980,118.

Please call 610.447.1555 or email support@nkhome.com with questions.Technical information can also be found online at: www.nkhome.com.

©2006. Nielsen-Kellerman reserves the right to change product specifications. NK, the NK logo, Cadence T1 and the Cadence T1 logo are registered trademarks of the Nielsen-Kellerman Company.

NEED HELP?

Our NK Knowledge Center has answers to many common questions, along with tips and tricks for using NK products. It's available 24-7 at www.nkhome.com/knowledgecenter/.

For email assistance with the installation or operation of your NK product, write techsupport@nkhome.com.

For help with an apparent malfunction, or to arrange or inquire about a repair, write repairs@nkhome.com.

Or call 800.784.4221 (610.447.1555 outside of the USA), Monday to Friday, 9 to 5.

1.)

Watch

2.)

Watch Band

Opening

 

 

 

Band Opening

 

 

 

 

 

Velcro

Velcro

Band Loop

 

 

Band Loop

NIELSEN-KELLERMAN

21 Creek Circle, Boothwyn, PA 19061 USA

phone: 610.447.1555

fax: 610.447.1577

email: info@nkhome.com web: www.nkhome.com

Image 2
Contents Time Mode Chrono ModeSpecifications & Warranty Alarm ModeInstalling the Watch Band To set the alarm