JVC MX-K35V manual Standard Recording, CD Synchro Recording, Tape to Tape Recording DUB- Bing

Page 25

Using the Cassette Deck (Recording)

English

Standard Recording

This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below; just substitute the source you want into this procedure, such as a tape in Deck A, a CD, or the Tuner. You can also record from an external equipment with this procedure.

2 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

3 Press the CD REC START button on the Unit.

“CD REC” appears on the display and the “REC” indicator lights up. Then, the System begins CD Synchro Recording and the tracks on the CD are recorded on the tape.

When recording of the tracks of all CDs is finished, “CD REC FINISHED” blinks on the display and the CD Player and Cas- sette Deck stop.

(When finished)

CD

REC START

To Record Any Sound Source to Tape

Follow these steps to record from any sound source onto a tape in Deck B.

1 Insert a blank or erasable tape into the Deck B and wind past the tape leader.

Tape travelling direction

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “NO REC” will appear on the display.

•After the CD Player has played the entire CD or all the pro- grammed tracks, the tape automatically stops.

To stop at any time during the recording process, press the REC START/STOP button on the Unit or the 7 button. “CD REC FINISHED” blinks on the display and the CD Player and Cassette Deck stop.

2 Prepare the source, by, for example, tuning in a radio station, loading CDs, or turning on connected equipment.

•For CD recording, see “CD Synchro Recording” mentioned below.

•For dubbing, see “Tape to Tape Recording (Dubbing)” described below.

3 Press the REC START/STOP button on the Unit.

The “REC” indicator lights up and the System begins record- ing.

The Tape indicator (3) blinks on the display.

•If the tab of the cassette tape on the Deck B is removed to prevent erasure or recording, “NO REC” will appear on the display.

To stop during recording, press the REC START/STOP but- ton on the Unit, or press the 7 button.

Recording an AM Station to Tape (Beat Cut)

When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. If this happens, press the PROGRAM button on the Unit to eliminate the beats.

1 Set to AM station and start recording.

2 Press the PROGRAM button on the Unit to eliminate the beats.

Each time you press the button, the display changes as shown below:

B-CUT-1=B-CUT-2 = (back to the beginning)

CD Synchro Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have set in a program.

1 Prepare CDs. (See page 12.)

Press the CD1-3 button (that you want to make recording), and then press the 7 button.

•If you want to record specific tracks only, you need to pro- gram the tracks beforehand. (See page 13.)

•When making SLEEP timer settings while doing CD Syn- chro recording, set enough time to allow for the CD to fin- ish playing, otherwise the power will go off before recording is completed.

Tape to Tape Recording (DUB- BING)

Recording from one tape to another is called dubbing. You can dub tapes simply, with just a single button.

1 Press the TAPE 3 button, and then press the

7button.

2 Insert the source cassette you want to copy from into Deck A for playback.

3 Insert a blank or erasable cassette you want to copy onto into Deck B for recording.

4 Press the DUBBING button on the Unit.

Deck A and Deck B will start simultaneously and the “REC” indicator lights up.

During dubbing, the Deck indicators “A” and “B” light up al- ternately.

•If no tape is inserted into Deck A, “NO TAPE” will appear on the display.

•If no tape is inserted into Deck B, “NO TAPE” will appear on the display.

To stop dubbing, press the REC START/STOP button on the Unit or the 7 button.

•During dubbing, you can hear sound effects through the speakers or headphones. However, the sound is dubbed without sound effects.

22

Page 24 Page 26
Image 25
Page 24 Page 26
Contents MX-K35V Reproduction of Labels Important for Laser ProductsSafety Precautions Introduction FeaturesHow This Manual Is Organized Table of Contents Set the Voltage Selector Switch AccessoriesHow To Put Batteries In the Remote Control Getting StartedConnecting the FM Antenna Using the Remote ControlUsing the Supplied Wire Antenna Connecting the Speakers Connecting the AM AntennaRear Panel of the Unit Connecting External Equipment Connecting a TVConnecting to the Wall Outlet Compu PlayAdjusting the Volume Turning the Power On and OffBasic Operations Entering the Number with the Remote Control Numeric Keys Selecting the Sound ModeOn the Remote Control Fade-out Muting Fade MutingTuning In a Station Using the TunerSetting the AM Tuner Interval Spacing One Touch RadioTo Change the FM Reception Mode Presetting StationsUsing the Unit Select a station using one of the following methodsDisc Number indicator Lights all the time About the Disc IndicatorExample of indication One Touch PlayTips Playing back the CD using the Disc Skip button Basics of Using the CD Player- Normal PlayTo Load CDs To Unload CDsTo Select a Track Programming the Playing Order of the TracksTo Make a Program Search PlayRepeating Tracks Random PlayTo Play the Program You Have Made To Exit and Re-enter Program PlayTray Lock Function MP3 Discs Playback Setting the TV System Using the Video CD Player Video CDsPress the MPX button on the Remote Control Selecting the Audio ChannelPlaying Video CDs with PBC Function VCD What is the Playback Control PBC function?Insert a video CD To select other item during menu selection status, repeatVarious Functions to Enhance Your Enjoyment Playing video CDs without the PBC FunctionFrame-by-Frame Playback Press the CD 6button to play the video CDViewing the Video Intro of Video CDs Display of Operating StatusViewing the Highlights of Video CDs Changing the Music Key LevelTo Fast-Wind a Tape Playing a TapeClose the cassette holder gently Press the Tape 3 buttonREC indicator Tape indicator Using the Cassette Deck RecordingThings To Know Before You Start Recording Eject Deck BCD Synchro Recording Standard RecordingTape to Tape Recording DUB- Bing To Record Any Sound Source to TapeListening to the External Equipment Using an External EquipmentRecording the Systems source to External Equipment Dubbing the Video CD intoSetting the Clock Using the TimersPress the CLOCK/TIMER button REC Recording TimerSetting the OFF time Example Setting the Daily TimerSetting the on time Example Selecting the music sourceTurning the Daily Timer On and Off Setting the REC Recording TimerSetting the volume level Press the SET button on the Unit Press the % button to turn off the SystemTurning the REC Recording Timer On and Off Timer Priority Setting the Sleep TimerDuring playback a source, press the Sleep button Wait for 5 secondsMIC jack Press the Karaoke button on the Remote Control Using the MicrophoneSinging Along with Karaoke Through the Speakers Playing the Microphone SoundMicrophone Mixing Care And Maintenance Specifications TroubleshootingImportant for mains AC line
Top Page Image Contents