JVC MX-K5 Playing Back CDs, Loading CDs, Playing Back the Entire Discs Continuous Play, Press

Page 18

English

Playing Back CDs

This unit has been designed to playback the following CDs:

 

Audio CD, CD-R, and CD-RW.

About the disc indicators

 

Each disc indicator corresponds to the disc tray of the same number.

Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit.

When playing a CD-R or CD-RW

User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized.”

•You can play back your original CD-Rs or CD-RWs recorded in music CD format. (However, they may not be played back depending on their characteristics or recording conditions.)

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

•CD-RWs may require a longer readout time. (This is caused by the fact that the reflectance of CD-RWs is lower than for regular CDs.)

Loading CDs

1 Press 0.

The unit automatically turns on and the carrousel comes out.

2 Place one or two discs correctly on the front slots of the carrousel, with its label side up.

CORRECTINCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

Disc number

Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator rotates while the corresponding CD is being played.

•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

Playing Back the Entire Discs — Continuous Play

You can play CDs continuously.

1 Load CDs.

2 Press one of the disc number buttons (CD1, CD2 or CD3) for the disc you want to play.

CD play starts from the first track of the selected disc.

Track number of the currently playing disc is flashing. (Track numbers exceeding 16 are not displayed.)

Track number Elapsed playing time

•Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the tray.

3

4

If you wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the remote control.

The carrousel rotates by 120˚.

Press 0again.

The carrousel closes.

DISC CHANGE

DISC SKIP

When you turn on the unit, ALL DISC indicator lights up on the display automatically. If you do not want all the CDs to play back, select 1 DISC by pressing REPEAT.

ALL DISC 1 DISC REPEAT 1

REPEAT ALL DISC REPEAT 1 DISC

ALL DISC:

Plays all loaded CD.

1 DISC:

Plays back one CD.

To stop during play, press 7.

To remove the disc, press 0.

– 13 –

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MX-K5 Precaución -- Interruptor English Español Português CA-MXK5 Class Laser Product Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelBecome familiar with the buttons and controls on your unit See pages in the parentheses for details Front PanelDisplay window Disc number buttons and lamps CD1, CD2, and CD3 13, 14Remote Control Remote ControlUnpacking Connecting AntennasGetting Started FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna Match the polarity colors Red + to red + and black To blackCancelling the Display Demonstration Connecting Other EquipmentAdjusting the Voltage Selector On the unit onlyPress CLOCK/TIMER Turning On or Off the PowerSetting the Clock Common Operations To turn down the volume level temporarily Adjusting the Volume Setting the AM Tuner Interval Spacing Selecting the SourcesReinforcing the Bass Sound Selecting the Sound ModesTuning in a Preset Station Tuning in a StationPresetting Stations Listening to FM and AM BroadcastsPlaying Back the Entire Discs Continuous Play Playing Back CDsLoading CDs PressLoad CDs Programming the Playing Order of the Tracks Program PlayBasic CD Operations Press Program so thatPlaying at Random Random Play Repeating Tracks or CDs Repeat PlayProhibiting Disc Ejection Tray Lock Playing Back Tapes Playing Back a TapeRecording Recording a Tape on Deck BPress REC START/STOP Press Dubbing Dubbing TapesCD Synchronized Recording Press CD REC StartMicrophone Mixing Using the MicrophonesSinging Along Karaoke To apply an echo to your voiceUsing the Timers Using Daily TimerPress CLOCK/TIMER repeatedly Using Recording Timer Using Sleep Timer Timer PriorityOn the remote control only Press Sleep To clean the disc MaintenanceTroubleshooting Handling discsSpecifications Important for mains AC line
Top Page Image Contents