JVC MX-K5 manual Using the Timers, Using Daily Timer, Press CLOCK/TIMER repeatedly

Page 25

	Using the Timers		Continued

	There are three timers available — Daily Timer, Recording	2 Press CLOCK/TIMER again.	/ TIMER
	Timer, and Sleep Timer.		CLOCK
	Timer, and Sleep Timer.	“ON TIME” appears for 2 seconds, then the
		“ON TIME” appears for 2 seconds, then the
	Before using the timers, you need to set the clock built in the	unit enters on-time setting mode.
	unit. (See “Setting the Clock” on page 9.)

English

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the

on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using a CD as the source to play —

–Make sure there is a CD on the currently selected disc number tray.

•When using a tape as the source to play —

–Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•When using the external component as the source to play —

–Set the timer equipped with the external component at the same time.

On the unit ONLY:

3 Set the on-time you want the unit to turn on.

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

The unit enters source selecting mode.

5 Press 4or ¢to select the source to play, then press SET.

•Each time you press 4 or ¢, the source changes as follows:

PRESET

SET

PRESET

SET

PRESET

	1	Press CLOCK/TIMER repeatedly	CLOCK
			/ TIMER

until “DAILY” appears on the display.

indicator lights up and the DAILY (daily timer) indicator also starts flashing on the display.

•Each time you press the button, the timer setting modes change as follows:

DAILY ON TIME REC

TUNER FM TUNER AM

SET

AUX TAPE CD

TUNER FM: tunes into a specified preset FM station.

=go to step 6.

TUNER AM: tunes into a specified preset AM station.

=go to step 6.

CD:plays a disc from the first track.

=go to step 7.

TAPE: plays a tape in deck A or B. =go to step 7.

AUX: plays an external source. =go to step 7.

Canceled CLOCK ON TIME

(See page 9.)

– 20 –

Image 25

Contents MX-K5 Precaución -- Interruptor English Español Português CA-MXK5 Class Laser Product Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsBecome familiar with the buttons and controls on your unit Display window Front PanelSee pages in the parentheses for details Disc number buttons and lamps CD1, CD2, and CD3 13, 14Remote Control Remote ControlGetting Started Connecting AntennasUnpacking FM antennaAM antenna Connecting SpeakersTo connect an outdoor AM antenna Match the polarity colors Red + to red + and black To blackAdjusting the Voltage Selector Connecting Other EquipmentCancelling the Display Demonstration On the unit onlySetting the Clock Turning On or Off the PowerPress CLOCK/TIMER Common OperationsSetting the AM Tuner Interval Spacing Adjusting the VolumeTo turn down the volume level temporarily Selecting the SourcesSelecting the Sound Modes Reinforcing the Bass SoundPresetting Stations Tuning in a StationTuning in a Preset Station Listening to FM and AM BroadcastsLoading CDs Playing Back CDsPlaying Back the Entire Discs Continuous Play PressBasic CD Operations Programming the Playing Order of the Tracks Program PlayLoad CDs Press Program so thatRepeating Tracks or CDs Repeat Play Playing at Random Random PlayProhibiting Disc Ejection Tray Lock Playing Back a Tape Playing Back TapesRecording a Tape on Deck B RecordingPress REC START/STOP CD Synchronized Recording Dubbing TapesPress Dubbing Press CD REC StartSinging Along Karaoke Using the MicrophonesMicrophone Mixing To apply an echo to your voiceUsing Daily Timer Using the TimersPress CLOCK/TIMER repeatedly Using Recording Timer Timer Priority Using Sleep TimerOn the remote control only Press Sleep Troubleshooting MaintenanceTo clean the disc Handling discsSpecifications Important for mains AC line