English
Using the Tuner
|
|
|
| PRESET+ |
|
|
|
| STANDBY/ON |
|
|
Number | 1 | 2 | 3 |
|
|
4 |
| PLAY MODE |
|
| |
Buttons | 5 | 6 | +10 |
| |
|
| REPEAT |
| ||
| 7 | 8 | 9 |
| |
|
|
| |||
|
|
| FM MODE | SOURCE PRESET | VOL |
| 10 |
| +10 | FM MODE |
|
| BASS |
| TREBLE | SET |
|
|
|
|
|
| |
|
| SET |
|
|
|
| MD/AUX |
| CANCEL |
|
|
|
|
|
| SOURCE | VOL +/– |
| FM/AM | DISPLAY | DIMMER SLEEP | Band display, Frequency display, Preset channel | |
FM/AM
CLOCK OPEN/
COLOR /TIMER CLOSE
VOLUME
STEREO MONO
FM mode indicators
*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage.
■Before listening to the radio:
•Make sure that both the FM and AM antennas are cor- rectly connected. (See page 4 and 5.)
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set to 9 or 10 kHz spacing (Initial setting: US...9 kHz, UW...10 kHz).
You can change it to 10 or 9 kHz spacing.
One Touch Radio
Just press the FM/AM button on the Remote Control to turn on the System and start playing the station you were last tuned to.
■You can switch from any other sound source to the radio by pressing the FM/AM button on the Remote Control (or the SOURCE button on the Unit).
Tuning In a Station
■Before proceeding:
1.Tune in AM stations to check the AM tuner interval (9 kHz or 10 kHz spacing).
2.Check the positions of the VOL +/– and %buttons on the Unit.
3.Turn off the System.
To select 10 kHz intervals, while holding down the VOL + button on the Unit, press the %button on the Unit. The Unit turns on and “AM 530kHz” will appear on the dis- play (at the same time, the 100 kHz spacing is selected for FM bradcast).
To select 9 kHz intervals, while holding down the VOL – button on the Unit, press the %button on the Unit. The Unit turns on and “AM 531kHz” will appear on the dis- play.
[10 kHz Intervals] | [9 kHz Intervals] |
VOL | VOL |
US ... Singapore | UW ... Latin America |
•When you change the setting, the preset stations are erased. You will need to preset the stations again. (See page 18.)
17
1 Press the FM/AM button.
The Band and Frequency you were last tuned to appear on the display.
(If the last station was selected using the preset number, the preset number appears first.)
Each time you press the button, the band alternates be- tween FM and AM.
FM/AM
AM | FM |
(on the Remote Control)
●Using the SOURCE button on the Unit
Each time you press the button, the sound source changes.
SOURCE
FM 
AM 
MD/AUX
(on the Unit)
2 Select a station using one of the follow- ing methods.
●Manual Tuning
Press the 4 or ¢(
or 
) button repeatedly to move from frequency to frequency until you find the station you want.
OR