JVC VS-DT2000 manual Troubleshooting, Symptom

Page 33

Troubleshooting

• If you are having a problem with your System, check this

• If you cannot solve the problem from the hints given

list for a possible solution before calling for service.

here, or the System has been physically damaged, call a

 

qualified person, such as your dealer, for service.

English

Symptom

No sound is heard.

Poor radio reception

The CD skips.

The CD does not play.

Unable to operate the Remote Control.

Operations are disabled.

“CD NO DISC” appears.

“CANNOT PLAY” or “UNFINALIZ” appears.

The characters and symbols on the display appear upside down.

Subwoofer automatically turns on, but no sound is output.

Subwoofer does not automatically turn on.

Possible Cause

•Connections are incorrect, or loose.

•Headphones are connected.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the System.

•The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

The CD is upside down.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The built-in microprocessor has malfunctioned due to external electrical interference.

There is no disc loaded.

•The CD-R or CD-RW that hasn’t yet been finalized (including blank discs) has been inserted.

•The disc has been inserted with its label side down.

The DISP.SET switch on the rear panel of the Center Unit has not been set correctly.

The volume knob of the Subwoofer is set to MIN position.

The volume knob of the Subwoofer is set to MIN position. Also, the volume level of the Center Unit is low.

Action

•Check all connections and make corrections. (See pages 4 to 8.)

•Disconnect the headphones.

•Reconnect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

Put the CD in with the label side up.

•Remove the obstruction.

•Replace the batteries.

Unplug the System then plug it back in.

Insert a disc.

•Insert a CD-R or CD-RW that has been finalized.

•Remove the disc and insert it with the label side front or up. (See page 19.)

Set the DISP.SET switch correctly. (See page 11.)

Adjust the volume knob.

Adjust both volume levels.

28

Page 32 Page 34
Image 33
Page 32 Page 34
Contents VS-DT2000 Precaución Class Laser Product Precaucion ventilación correcta Atenção Features IntroductionHow This Manual Is Organized Table of Contents Set the Voltage Selector Switch AccessoriesHow To Put Batteries In the Remote Control Getting StartedConnecting the FM Antenna Using the Supplied Wire AntennaUsing the Coaxial Type Connector Not Supplied AM loop antenna can be attached to a wall Connecting the AM AntennaConnecting the Speakers SP-VSDT2000 Connecting the Powered Subwoofer SP-PW2000 Connecting External EquipmentAttaching the Spacers Connecting an MD Recorder, etc Digital Output Connecting the AC Power CordInstalling the Unit on the Stand Example of attachment Center Unit Installing the Equipment on the WallExample of attachment Speakers When the Unit is placed vertically Changing the Display and Control Buttons SettingsCompu Play Using the Remote ControlTurning the Power On and Off Adjusting the Brightness DimmerBasic Operations Adjusting the Volume Changing the Color Color Tone Control BASS/TREBLEShowing the Time Display Operating the Powered Subwoofer Using the Powered SubwooferPresetting the Volume Adding the Richness to the Bass PhaseINPUTLOW-LEVEL Input TerminalsSetting the AM Tuner Interval Spacing Using the TunerTuning In a Station One Touch RadioManual Presetting Presetting StationsTo Change the FM Reception Mode Press the SET buttonUsing the CD Player To Insert a CDPress the % button To Unload a CD Basics of Using the CD Player Normal PlaySearch Play To Play a CDTo Modify the Program Programming the Playing Order of the TracksPress the Number button to select the track to program Repeat to select the other tracks for the programRepeating Tracks Random PlayChild Lock To Lock the CD EjectionUsing External Equipment Listening to External EquipmentRecording the System’s Source to External Equipment Setting the Clock Using the TimersPress the CLOCK/TIMER button on the Remote Control Press the ¢ or 4 button on Remote Control to set the hourSetting the OFF time Example Setting the Daily TimerSetting the on time Example Setting the volume levelBefore turning off the System, prepare Setting the Sleep TimerMusic source selected in step Press the % button to turn off the Sys- temCleaning the unit Care And MaintenanceCompact Discs Moisture CondensationSymptom TroubleshootingSpecifications Dimensions for Installation CA-VSDT2000 Important for mains AC line 110V 127V
Top Page Image Contents