Selecting preset sound modes | 1 Call up the sound mode you want to | |
| adjust. | |
You can select a preset sound adjustment | ||
• See on the left column for | ||
suitable to the music genre. | ||
details. | ||
| ||
Select the sound mode you want. |
| |
Each time you press the button, | 2 To adjust the bass or treble level. | |
the sound mode changes as | ||
1 Select “BAS” (bass) or “TRE” (treble). | ||
follows: |
ENGLISH
SCM OFF 
BEAT 
SOFT 
POP 
Ex.: When you select “BEAT”
Indication | For: | Preset values | ||
|
| BAS | TRE | S.BASS |
|
|
|
|
|
SCM OFF | (Flat sound) | 00 | 00 | OFF |
|
|
|
|
|
BEAT | Rock or | +2 | 00 | ON |
| disco music |
|
|
|
|
|
|
|
|
SOFT | Quiet | +1 | OFF | |
| background |
|
|
|
| music |
|
|
|
|
|
|
|
|
POP | Light music | +4 | +1 | OFF |
|
|
|
|
|
Notes:
•You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” below.
•To adjust the bass and treble reinforcement levels or to turn on/off the super bass function, see page 10.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
2Adjust the level.
To turn on or off the super bass function.
• See page 10 for details.
3 Repeat step 2 to adjust the other items.
4 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for the selected sound mode is
stored in memory.
5 Repeat the same procedure to store other sound modes.
To reset to the factory settings, repeat the
same procedure and reassign the preset values
listed in the table on the left column.
11