JVC LVT1290-007A Activating the DSP Modes, To cancel the DSP mode, All Channel Stereo, Mono Film

Page 29
All Channel Stereo

All Channel Stereo

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers.

If the surround speakers are set to “NONE,” you cannot select “ALL CH STEREO.”

Sound reproduced from normal stereo

Sound reproduced from All Channel Stereo mode

Activating the DSP Modes

Activating one of the DSP modes for a source automatically recalls the memorized settings and adjustments (see pages 16 to 22).

1Select and play any source.

2Press DSP repeatedly until the DSP mode you want appears on the display.

Each time you press the button, the DSP modes change as follows:

DSP

= HALL 1

= HALL 2

= LIVE CLUB

= DANCE CLUB

= PAVILION

= ALL CH STEREO

= THEATER 1

= THEATER 2

= MONO FILM

=(Back to the beginning)

Note:

When the surround speakers are set to “NONE,” the 3D-PHONIC processing is applied to the DSP modes (the 3D-PHONIC indicator also lights up).

To adjust the effect level (except All Channel Stereo), see page

22.

English

Mono Film

In order to reproduce a more acoustic sound field in your listening room while viewing monaural sound video software (analog and 2-channel digital signals), you can use this mode.

The surround effect will be added, and the sound localization of actor’s words will be improved. This mode cannot be used for

multi-channel digital signals.

When “MONO FILM” is used, the sounds come out of all the connected and activated speakers.

If surround speakers are set to “NONE” in the speaker setting, JVC’s original 3D-PHONIC processing (which has been developed to create the surround effect through the front speakers only) is used. The 3D-PHONIC indicator lights up on the display.

If incoming signals change from 2-channel digital signal to another digital signal type, “MONO FILM” is canceled and an appropriate Surround mode is activated.

To cancel the DSP mode

Press SURROUND/DSP OFF.

27

Image 29
Contents RX-5052S EnglishAUDIO/VIDEO CONTROL RECEIVER INSTRUCTIONSCaution--STANDBY/ON button Warnings, Cautions, and OthersCaution Proper Ventilation RX-5052SAdjusting Sound Table of ContentsUsing the Surround Modes Using the DSP ModesEnglish Parts IdentificationEnglish Adjusting the Voltage Selector Before InstallationChecking the Supplied Accessories Connecting the FM and AM AntennasConnecting the speakers Connecting the Speakers and Subwoofer2Press and hold the clamp of the speaker terminal 3Insert the speaker cordConnecting the subwoofer Connecting Audio/Video ComponentsGetting Started Placing speakersDVD player Video component connectionsEnglish Digital Connections Connecting the Power CordGetting Started English1Turn on the power Daily Operational Procedure3Adjust the volume Turning On the PowerSpeaker and signal indicators on the display Adjusting the VolumeOn the remote control Basic OperationsTurning On and Off the Listening with headphonesSubwoofer Sound Selecting the Analog or Digital Input ModeChanging the Source Name Attenuating the Input SignalChanging the Display Brightness DIGITAL AUTO DOLBY DIGITAL DTS SURROUNDBasic adjustment auto memory Using the Sleep TimerMuting the Sound Press SLEEP repeatedlyUsing Preset Tuning Setting the AM TunerTuning in to Stations Manually Receiving Radio BroadcastsSelecting the FM Reception Mode To tune in a preset stationWhile listening to an FM station, press FM MODE AUTO MUTINGQuick Speaker Setup Basic Settings1 Press QUICK SPEAKER SETUP channel numberBasic Procedure Basic Setting Items1 Press SETTING 3Press in MULTI JOG PUSH SETSetting the Speakers Basic SettingsSetting the Speaker Distance Setting the Bass Sounds¶Crossover frequency-CROSSOVER Selecting the Main or Sub Channel¶Low frequency effect attenuator-LFEATTENUATE ¶Midnight mode-MIDNIGHTMODE¶Auto Surround-AUTOSURROUND Setting the Digital Input Terminals¶Virtual Surround Back-VIRTUALSBACK ¶Digital Input terminal-DIGITALINBasic Adjustment Items Adjusting Sound1 Press ADJUST Basic ProcedureAdjusting the Equalization Patterns Adjusting SoundAdjusting the Speaker Output Levels ¶ Equalization adjustment-DEQ63HZ, DEQ250HZReproducing Theater Ambience Using the Surround ModesIntroducing the Surround Modes Dolby Digital*1DTS*2 Using the Surround ModesDTS Digital Surround DTS 96/24Activating the Surround Modes To cancel the Surround mode1Select and play any source 2Press SURROUND to activate the Surround modeReproducing the Sound Field Using the DSP ModesIntroducing the DSP Modes Digital Acoustic Processor DAP modesActivating the DSP Modes To cancel the DSP modeAll Channel Stereo Mono FilmOperating Audio Components Operating JVC’s Audio/Video ComponentsSound control section Amplifier TunerCD changer Operating Video ComponentsDVD player EnglishPROBLEM TroubleshootingSOLUTION EnglishAmplifier SpecificationsOutput Power EnglishFM tuner IHF SpecificationsAM tuner GeneralAUDIO/VIDEO CONTROL RECEIVER RX-5052SVOLTAGE SELECTOR CAUTION for mains AC line