JVC 0105RYMMDWJEIN, LVT1290-007A manual Specifications, FM tuner IHF, AM tuner, General, English

Page 34
Specifications

English

Specifications

FM tuner (IHF)

 

 

Tuning Range:

 

87.50 MHz to 108.00 MHz

Usable Sensitivity

Monaural:

12.8 dBf (1.2 µV/75 )

50 dB Quieting Sensitivity

Monaural:

16.0 dBf (1.7 µV/75 )

 

Stereo:

37.5 dBf (20.5 µV/75 )

Stereo Separation at OUT (REC):

 

35 dB at 1 kHz

AM tuner

 

 

Tuning Range:

 

531 kHz to 1 602 kHz (at 9 kHz intervals)

 

 

530 kHz to 1 600 kHz (at 10 kHz intervals)

General

 

 

Power Requirements:

 

AC 110 V/127 V/220 V/230 V – 240 V ,

 

 

adjustable with the voltage selector, 50 Hz/60 Hz

Power Consumption:

 

210 W (at operation)

 

 

4.5 W (in standby mode)

Dimensions (W x H x D):

 

435 mm x 146.5 mm x 369.5 mm

Mass:

 

8.0 kg

 

 

Designs and specifications are subject to change without notice.

32

Image 34
Contents AUDIO/VIDEO CONTROL RECEIVER EnglishRX-5052S INSTRUCTIONSCaution Proper Ventilation Warnings, Cautions, and OthersCaution--STANDBY/ON button RX-5052SUsing the Surround Modes Table of ContentsAdjusting Sound Using the DSP ModesParts Identification EnglishEnglish Checking the Supplied Accessories Before InstallationAdjusting the Voltage Selector Connecting the FM and AM Antennas2Press and hold the clamp of the speaker terminal Connecting the Speakers and SubwooferConnecting the speakers 3Insert the speaker cordGetting Started Connecting Audio/Video ComponentsConnecting the subwoofer Placing speakersEnglish Video component connectionsDVD player Getting Started Connecting the Power CordDigital Connections English3Adjust the volume Daily Operational Procedure1Turn on the power Turning On the PowerOn the remote control Adjusting the VolumeSpeaker and signal indicators on the display Basic OperationsSubwoofer Sound Listening with headphonesTurning On and Off the Selecting the Analog or Digital Input ModeChanging the Display Brightness Attenuating the Input SignalChanging the Source Name DIGITAL AUTO DOLBY DIGITAL DTS SURROUNDMuting the Sound Using the Sleep TimerBasic adjustment auto memory Press SLEEP repeatedlyTuning in to Stations Manually Setting the AM TunerUsing Preset Tuning Receiving Radio BroadcastsWhile listening to an FM station, press FM MODE To tune in a preset stationSelecting the FM Reception Mode AUTO MUTING1 Press QUICK SPEAKER SETUP Basic SettingsQuick Speaker Setup channel number1 Press SETTING Basic Setting ItemsBasic Procedure 3Press in MULTI JOG PUSH SETSetting the Speaker Distance Basic SettingsSetting the Speakers Setting the Bass Sounds¶Low frequency effect attenuator-LFEATTENUATE Selecting the Main or Sub Channel¶Crossover frequency-CROSSOVER ¶Midnight mode-MIDNIGHTMODE¶Virtual Surround Back-VIRTUALSBACK Setting the Digital Input Terminals¶Auto Surround-AUTOSURROUND ¶Digital Input terminal-DIGITALIN1 Press ADJUST Adjusting SoundBasic Adjustment Items Basic ProcedureAdjusting the Speaker Output Levels Adjusting SoundAdjusting the Equalization Patterns ¶ Equalization adjustment-DEQ63HZ, DEQ250HZIntroducing the Surround Modes Using the Surround ModesReproducing Theater Ambience Dolby Digital*1DTS Digital Surround Using the Surround ModesDTS*2 DTS 96/241Select and play any source To cancel the Surround modeActivating the Surround Modes 2Press SURROUND to activate the Surround modeIntroducing the DSP Modes Using the DSP ModesReproducing the Sound Field Digital Acoustic Processor DAP modesAll Channel Stereo To cancel the DSP modeActivating the DSP Modes Mono FilmSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerDVD player Operating Video ComponentsCD changer EnglishSOLUTION TroubleshootingPROBLEM EnglishOutput Power SpecificationsAmplifier EnglishAM tuner SpecificationsFM tuner IHF GeneralVOLTAGE SELECTOR RX-5052SAUDIO/VIDEO CONTROL RECEIVER CAUTION for mains AC line