JVC KD-AR400 manual Specifications, FM Tuner, AM Tuner

Page 37

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel

Continuous Power Output (RMS):

Front: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.5V/20 kΩ load (full scale) Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range

FM:	87.5 MHz to 107.9 MHz
AM:	530 kHz to 1 710 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 ∝V/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 ∝V/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit MP3 decoding format:

MPEG1/2 Audio Layer 3

Max. Bit Rate: 320 Kbps

GENERAL

Power Requirement

Operating Voltage:

DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F) Dimensions (W ⋅ H ⋅ D):

Installation Size (approx.):

182 mm ⋅ 52 mm ⋅ 150 mm (7-3/16" ⋅ 2-1/16" ⋅ 5-15/16")

Panel Size (approx.):

188 mm ⋅ 58 mm ⋅ 12 mm (7-7/16" ⋅ 2-5/16" ⋅ 1/2")

Mass (approx.):

1.4 kg (3.1 lbs) (excluding accessories)

Design and specifications are subject to change without notice.

ENGLISH

[AM Tuner]	If a kit is necessary for your car, consult your
Sensitivity: 20 ∝V	telephone directory for the nearest car audio
Selectivity: 35 dB	speciality shop.

37

Image 37

Contents For customer Use Recepteur CDInformation For U.S.A How to reset your unitContents Control panel Location of the ButtonsDisplay window Remote controller Installing the battery Preparing the remote controllerRemove the battery holder Place the batteryTo turn off the power To drop the volume in a momentAdjust the volume Basic OperationsFinish the setting Canceling the display demonstrationTo cancel the display demonstration, follow To activate the display demonstration, repeatSet the minute Setting the clockListening to the radio Radio OperationsSearching for a station automatically Auto search Searching for a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Select the FM band FM1 3 you want to store FM stations intoManual preset Tuning in to a preset stationSelect the number 1 6 for the preset station you want Tune in to a station in this example, of 92.5 MHzPlaying a CD CD OperationsOpen the control panel Insert a CD into the loading slotTo go to a particular track directly To stop play and eject the CDTo fast-forward or reverse the track To go to the next or previous tracksSelecting CD playback modes How to use the +10 and -10 buttonsTo play back tracks at random Disc Random Play To play back tracks repeatedly Track Repeat PlayPlaying a CD Text Prohibiting disc ejection To cancel the prohibition and unlock the discWhile pressing CD CD-CH, press Hold for more than 2 seconds MP3 Introduction What is MP3?How are MP3 files recorded and played back? Compatible with ID3 TagPlaying an MP3 disc MP3 OperationsInsert an MP3 disc into the loading slot To change the display information To stop play and eject the discTo fast-forward or reverse the file To skip to the next or previous filesTo go to a particular folder directly Current folder +10 and -10 buttonsMode Active Plays repeatedly Indicator Mode Active Plays at random IndicatorSelecting MP3 playback modes To skip to the next or previous folderSelect the sound mode you want Sound AdjustmentsFor Preset values Adjust the setting Adjusting the soundSelect the item you want to adjust Repeat steps 1 and 2 to adjust the other itemsBasic Procedure Changing the general settings PSMOther Main Functions To select the level meter-LEVEL Preferred Setting Mode PSM itemsTo select the dimmer mode-DIMMER Indications Selectable values/itemsTo turn the tag display on or off-TAG Disp To select the scroll mode-SCROLLTo select the amplifier gain control To select the external component to useAttaching the control panel Detaching the control panelPlaying discs CD Changer OperationsSelect the CD changer CD-CH To fast-forward or reverse the track/file To go to a particular disc directlyTo skip to the next or previous tracks/files To skip to the next or previous folder only for MP3 discs To go to a track/file quickly +10 and -10 buttonsTo show the disc information for CD Text and MP3 discs Selecting the playback modes Mode ActiveFor MP3 discs For CDsPlaying an external component External Component OperationsSelect the external component Line Symptoms Causes Remedies TroubleshootingGeneral PlaybackMP3 Playback About mistracking CDChangerHandling discs MaintenanceFM Tuner SpecificationsAM Tuner Call Page Page Antes de extraer la unidad, libere la sección trasera GET0189-002ARemarque NotaFuse blows Sound is distortedEnglish Español Français KD-G400 KD-AR400JVC CD changer KD-AR400 KD-G400Page Page Page Page Page Page Page Page Page Page Page