JVC KD-S670 manual Specifications, FM Tuner, AM Tuner

Page 27

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front: 45 watts per channel

Rear: 45 watts per channel Continuous Power Output (RMS):

Front: 17 watts per channel into 4 Ω, 40 to 20 000 Hz at no more than 0.8% total harmonic distortion.

Rear: 17 watts per channel into 4 Ω, 40 to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble:±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range

FM: 87.5 MHz to 107.9 MHz

AM: 530 kHz to 1 710 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

GENERAL

Power Requirement

Operating Voltage: DC 14.4 volts (11 volts to 16 volts allowance)

Allowable Working Temperature:

0°C to +40°C (32°F to 104°F) Grounding System: Negative ground Dimensions (W x H x D)

Installation Size:

182 mm x 52 mm x 150 mm (7-3/16" x 2-1/16" x 5-15/16")

Panel Size: 188 mm x 58 mm x 14 mm (7-7/16" x 2-5/16" x 5/8")

Mass: 1.3 kg (2.9 lbs) (excluding accessories)

Design and specifications subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

ENGLISH

[AM Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

27

Image 27

Contents CD Receiver Receptor CON CD Recepteur CD InstructionsInformation For USA PrecautionsContents Basic Operations Turn on the powerAdjust the volume Adjust the sound as you want see pages 13Start searching a station Radio OperationsListening to the radio Select the band FM1, FM2, FM3 or AMStoring stations in memory FM station automatic preset SSMManual preset Tune into a station of 88.3 MHzPress and hold the button for more than 2 seconds Tuning into a preset station Select the number 1 6 for the preset station you wantSelect the band FM1, FM2, FM3 or AM you want Selecting FM reception sound When an FM stereo broadcast is hard to receiveOther convenient tuner functions Scanning broadcast stationsTo stop play and eject the CD CD OperationsPlaying a CD Insert a disc into the loading slotTo go to a particular track directly Locating a track or a particular portion on a CDTo fast forward or reverse the track To go to the next track or the previous trackTo play back tracks at random Random Play Selecting CD playback modesOther convenient CD functions Prohibiting CD ejectionAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustTurning on/off the loudness function Selecting and storing the sound modes Using the Sound Control MemorySelect the sound mode you want Indication For Preset valuesRecalling the sound modes When SCM Link is set to Link ON, select the sourcePress and hold SEL for more than 2 seconds Canceling Advanced SCMStoring your own sound adjustments Other Main Functions Setting the clockTo check the current clock time changing the display mode Selecting the level display Unlock the control panel How to detach the control panelHow to attach the control panel Detaching the control panelReturn the battery holder Installing the batteryRemove the battery holder Place the batterySelects the source Using the remote controllerHandling CDs MaintenanceSymptoms Causes Remedies TroubleshootingSpecifications FM TunerAM Tuner Call No sound from the speakers Before mounting PressAvant le montage Appuyer sur Fuse blowsAsegúrese de conservar las manijas después de instalarlo Be sure to keep the handles after installing itNota Be sure to ground this unit to the car’s chassisAmplifier / Amplificador / Amplificateur