JVC rx-8010vbk Activating the Subwoofer Sound Attenuating the Input Signal, Reinforcing the Bass

Page 17

Activating the Subwoofer Sound

Attenuating the Input Signal

You can cancel the subwoofer sound even though you have connected a subwoofer and have set “SUBWOOFER” to “YES” (see page 17). This is useful when enjoying surround sound at night.

On the front panel ONLY:

 

Press SUBWOOFER OUT ON/OFF to

SUBWOOFER OUT ON/OFF

cancel the subwoofer sound output.

 

Each time you press the button, the subwoofer sound output is deactivated (“SUBWFR OFF”) or activated (“SUBWFR ON”).

Select “SUBWFR OFF” to deactivate the subwoofer sound output.

Select “SUBWFR ON” to activate it.

Note:

You cannot select “SUBWFR OFF” even though “SUBWOOFER” is set to “YES,” when “SMALL” is selected for the front speakers (see page 17.)

When the input level of the playing source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal level to prevent the sound distortion.

• You can do this setting for each source.

On the front panel ONLY:

Press and hold INPUT ATT (INPUT

INPUT

ANALOG/DIGITAL) so that the INPUT ATT

ANALOG/DIGITAL

indicator lights up on the display.

INPUT ATT

• Each time you press and hold the button, the

 

input attenuator mode turns on (“ATT ON”) or

 

off (“NORMAL”).

 

Notes:

This function is available only for the sources connected using the analog terminals.

When selecting “DVD MULTI” as the source, this effect does not work.

Reinforcing the Bass

You can boost the bass level.

• You can do this setting for each source.

On the front panel:

 

Press BASS BOOST to select the bass boost

BASS BOOST

function.

 

The BASS BOOST lamp on the front panel button lights up.

Each time you press the button, the bass boost function turns on (“BOOST ON”) and off (“BOOST OFF”).

Select “BOOST ON” to activate the bass boost function. The BASS BOOST lamp on the front panel button lights up.

Select “BOOST OFF” to cancel it.

The BASS BOOST lamp on the front panel button goes off.

From the remote control:

1.

Press SOUND.

SOUND

 

 

The 10 keys are activated for sound

 

 

adjustments.

 

2.

Press BASS BOOST to select the bass

BASS

BOOST

 

boost function.

1

 

 

The BASS BOOST lamp on the front panel button lights up.

Each time you press the button, the bass boost function turns on (“BOOST ON”) and off (“BOOST OFF”).

Select “BOOST ON” to activate the bass boost function. The BASS BOOST lamp on the front panel button lights up.

Select “BOOST OFF” to cancel it.

The BASS BOOST lamp on the front panel button goes off.

Note:

This function does not affect the sounds outputting from the rear speakers.

Selecting the Line Direct Function

You can enjoy the sound closer to original source by skipping the sound adjustments such as digital equalization and midnight mode. Only the volume level is adjustable when the line direct function is turned on.

• You can do this setting for each source.

Press LINE DIRECT.

The LINE DIRECT lamp on the front panel button lights up.

LINE DIRECTLINEDIRECT

On the front panel

From the remote control

Each time you press the button, the line direct function turns on (“DIRECT ON”) and off (“DIRECT OFF”).

Select “DIRECT ON” to activate the line direct function. The LINE DIRECT lamp on the front panel button lights up.

Select “DIRECT OFF” to cancel it.

The LINE DIRECT lamp on the front panel button goes off.

Notes:

If you turn on the line direct function while using the Surround and DSP modes, the effect changes as follows:

Input

Mode

Surround

DSP

 

 

 

 

Analog

Not valid

Not valid

Digital

 

Valid

Not valid

Turning off the line direct function activates the sound adjustments previously selected such as the digital equalization and midnight mode.

14

Image 17
Contents RX-8010VBK Mises en garde, précautions et indications diverses For Canada/pour Le Canada Table of Contents Parts Identification Remote Control Front PanelCATV/DBS, VCR 1, TV, Audio USB AUDIO, FM/AMChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM Antenna ConnectionsConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker Analog ConnectionsVideo component connections Cassette deck or MD recorderVCRs CD recorderDBS tuner TV and/or DBS tuner Video cameraDVD player Digital output terminal Digital ConnectionsDigital input terminals USB Connection Change the PC audio settingLamp on the USB Audio button lights up USB cablePutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Replace the coverBefore using the remote control Turning the Power On and Off StandbyBasic Operations Selecting the Source to PlaySelecting different sources for picture and sound Adjusting the VolumeSignal and speaker indicators on the display From the remote control only Listening at Night Midnight ModeSelecting the Front Speakers Muting the Sound On the front panel onlySelecting the Line Direct Function Activating the Subwoofer Sound Attenuating the Input SignalReinforcing the Bass Recording a Source Adjusting the Equalization PatternsUsing the Sleep Timer Adjusting the Front Speaker Output Balance Basic SettingsSelecting the Video Input Terminal Changing the Source NameSetting the Speakers for a Surround Field Setting the Subwoofer InformationAdjusting the Subwoofer Output Level To select the delay time CTR Delay Center Delay Appears on the displayCenter speaker output from 0 ms to 5 ms 15 msDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input Mode To store the volume level Basic Setting and Adjustment Auto MemoryShowing the Text Information on Display To turn on the One Touch OperationReceiving Radio Broadcasts Tuning in Stations Manually Using Preset TuningSelecting the FM Reception Mode Press FM/AM Preset 5/untilPress FM Mode Press FM/AMDSP modes Creating a Surround Field in Your RoomSurround modes Headphone DSP mode DVD Multi Playback ModeReproducing the Sound Field 3D-PHONIC modesAvailable DSP modes Available DSP Modes According to the Speaker ArrangementAdjusting the Surround Modes Adjusting the DAP Modes Adjust the speaker output levelsAdjust the center tone Adjust the liveness Adjust the room size sense of spaciousnessPress DSP Mode repeatedly until DAP mode you want to adjustAdjusting the Surround Modes with DAP Modes Press Liveness to adjust the liveness. LivenessOutput balance Speaker output levels -10 dB toCenter Press Liveness to adjustLiveness Adjust the speaker output levels Press DSP Mode repeatedly until DSP Mode Adjusting the 5 CH/4 CH Stereo ModePress DSP Mode repeatedly until Mode OnlyAdjusting the 3D-PHONIC Modes CH Stereo mode onlyAdjust the center speaker output level Center tone level you want for3D Action or 3D Digital Adjust the overall levels of the effectPress Center to select the center SpeakerActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayPress Menu Using the On-Screen MenusPress 5 / to move to Digital EQ Press 5 / to move to Sound CONTROL, then press 2Then press 2 CONTROL, then press 2Press 5/ to move To Level ADJUST, then press 2 Press 5/ to move to Effect ADJUST, then press 2Select DVD Multi as the playing source Press 5/ to move to Sound CONTROL, then press 2Select FM or AM as the playing source Press 5/ to move To Preset MEMORY, then press 2Press 5/ to move to Tuner CONTROL, then press 2 Menu disappears from the TVSetting the Basic Setting Items Press 5 / to move To Setting Then press 2Setting 2 menu Setting 1 menuRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionCD player MD recorder Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Press ExitPress 5 / to move to SEARCH, then Press SET Press Text Display while CD is selected as the sourcePress 5 / to move To Performer Then press SET Press SET againEntering the Disc Information Press 5/ to move to Title Input Then press SETSearch for a disc by its genre For the CD Player with the disc memory functionPress Text Display while MD is selected as the source Press 5/ / 2/ 3toMove to Disc Michael in this Example, then press SET Press 5/ to moveConnections 1 AV Compu Link Connection AV Compu Link Remote Control SystemConnections 2 Video Cable Connection VCRAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section AmplifierCD recorder CD changerCassette deck TurntableDVD player Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks Try to operate your TV by pressing TV Power Release TV PowerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing VCR 1 Power Release CATV/DBS PowerRelease VCR 1 Power Release Audio Power Problem Possible Cause Solution TroubleshootingRemove the obstruction Amplifier SpecificationsAudio VideoFM tuner IHF Tuning Range Usable Sensitivity Signal-to-Noise RatioAM tuner General1099 781 954 650Valley Road Wayne, NJ Limited Warranty AUDIO-2 JVC 0101NHMMDWJEIN
Related manuals
Manual 64 pages 41.74 Kb