Cardio Theater Integrated Bracket Assembly Instructions
3.Continue to feed the coaxial/power cable and its two connectors through the left bracket arm.
Feed the coaxial/power cable and its two connectors back through the hole at the base of the center tube and down the left arm of the bracket assembly. Pull the cables from the side slot. Continue pulling until no cable (except the coiled controller cable) protrude from the hole at the base of the center tube.
Important: Do not feed the coiled controller cable through the bracket arm. It can be left hanging from the base of the center tube.
3 |
|
| Coaxial/power |
| cable |
| Controller |
| cable |
Bracket | assembly |
| Side slot |
Left bracket arm | |
| Coaxial |
| connector |
| Power |
| connector |
| Controller |
| cable |
Install the Bracket Assembly
page 7