Cardio Theater Integrated Bracket Assembly Instructions
9.Align the mounting holes.
Ask your assistant to slide the bracket assembly to the inside of the upright supports and align the mounting holes.
Important: Continue feeding the remaining cable so that no cable protrudes or gets pinched while mounting the bracket.
10.Replace the fasteners.
Use a hex key to replace the four screws and washers removed in step 6. For alignment purposes, tighten the rear two screws first. Wrench tighten the remaining two fasteners so that the display console and bracket assembly are securely attached to the upright supports on the treadmill.
9 Display console
Bracket assembly
|
| Left upright |
|
| support |
10 | Display console |
|
|
| Bracket |
|
| assembly |
| Tighten rear two | Left upright |
| screws first. | |
| support | |
|
|
Install the Bracket Assembly
page 9