JVC rx-8010vbk manual Specifications, Amplifier, Audio, Video

Specifications

Amplifier

Output Power:

At Stereo operation:

Front channels:

120 W per channel, min. RMS, driven into 8 Ω, 20

Hz to 20 kHz with no more than 0.08% total harmonic distortion.

At Surround operation:
Front channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
	more than 0.8% total harmonic distortion.
Center channel:	100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
	0.8% total harmonic distortion.
Rear channels:	100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
	more than 0.8% total harmonic distortion.

Audio			2.5 mV/47 kΩ
Audio Input Sensitivity/Impedance (1 kHz):		PHONO (MM):
		DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
			200 mV/47 kΩ
	Audio Input (DIGITAL IN)* :	Coaxial: DIGITAL 1 (DVD):	0.5 V(p-p)/75 Ω
		Optical: DIGITAL 2 (CD), DIGITAL 3 (TV), DIGITAL 4 (CDR):
			–21 dBm to –15 dBm (660 nm ±30 nm)
		*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with
		sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
		USB: Revision 1.0, full-speed (with sampling frequency — 32		kHz, 44.1 kHz, 48 kHz)
	Audio Output Level:	VCR 1, VCR 2, CDR, TAPE/MD:	200 mV
	Digital output:	Optical: DIGITAL OUTPUT:	Signal wave length: 660 nm
			Output level: –21 dBm to –15 dBm
Signal-to-Noise Ratio (’66 IHF/’78 IHF):		PHONO (MM):	70 dB/78 dB (at REC OUT)
		DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
			92 dB/80 dB (LINE DIRECT ON)
	Frequency Response (8 Ω):	PHONO:	20 Hz to 20 kHz (±1 dB)
		DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS, CD, CDR, TAPE/MD:
			20 Hz to 100 kHz (+1 dB, –3 dB)
		USB:	20 Hz to 20 kHz (+1 dB, –3 dB)
	RIAA Phono Equalization:	±1.0 dB (20 Hz to 20 kHz)
	Bass boost:	+6 dB ±1.0 dB at 100 Hz
Video
	Video Input Sensitivity/Impedance:			1 V(p-p)/75 Ω
	Composite video:	DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
	S-video:	DVD, VCR 1, VCR 2, VIDEO, TV SOUND/DBS:
			(Y: luminance):	1 V(p-p)/75 Ω
			(C: chrominance, burst):	0.286 V(p-p)/75 Ω
	Component video:	DVD, DBS:	(Y: luminance):	1 V(p-p)/75 Ω
			(PB, PR):	0.7 V(p-p)/75 Ω
	Video Output Level:
	Composite video:	VCR 1, VCR 2, MONITOR OUT:		1 V(p-p)/75 Ω
	S-video:	VCR 1, VCR 2, MONITOR OUT:	(Y: luminance):	1 V(p-p)/75 Ω
			(C: chrominance, burst):	0.286 V(p-p)/75 Ω
	Component video:	MONITOR OUT:	(Y: luminance):	1 V(p-p)/75 Ω
			(PB, PR):	0.7 V(p-p)/75 Ω
	Synchronization:	Negative
	Signal-to-Noise Ratio:	45 dB
57	On-Screen Color System:	NTSC