JVC rx-8010vbk Press 5 / to move to Sound CONTROL, then press 2, Press 5 / to move to Digital EQ

Adjusting the Equalization Pattern

(Also see page 15)

1. Press MENU.

The MENU appears on the TV.

•Pressing one of the 5/ °/ 2/ 3buttons also displays the MENU.

2.Press 5 / ° to move to “SOUND CONTROL,” then press 2/ 3.

The SOUND CONTROL menu appears.

3. Press 5 / ° to move to “DIGITAL EQ,”

For Surround mode, Surround mode with DAP

mode:
“TEST TONE”:	Output a test tone.
“L/R BALANCE”:	Adjust the right and left balance
	of the front speakers.

“CENTER LEVEL”: Adjust the center speaker output level. *

“REAR L LEVEL”: Adjust the left rear speaker output level. **

“REAR R LEVEL”: Adjust the right rear speaker output level. **

“SUBWFR LEVEL”: Adjust the subwoofer output level. ***

then press 2/ 3.

￿

For DAP mode:

“L/R BALANCE”: Adjust the right and left balance

The DIGITAL EQ menu appears.

4. Press 5/ °to move

to the frequency you want to adjust.

5. Press 2/ 3to adjust	￿
the frequency level you
want.

The frequency level changes by 2 dB from –8 dB to +8 dB.

6.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Adjusting the Surround and DSP Modes

(Also see pages 27 – 34)

You can use a Surround mode with a DAP mode, but not with the 5 CH/4 CH Stereo mode and 3D PHONIC mode.

1. Press MENU.

The MENU appears on the TV.

•Pressing one of the 5/ °/ 2/ 3buttons also displays the MENU.

2.Select Surround mode and/or DSP mode you like to adjust (see page 36).

3.Press 5 / ° to move

to “SOUND ￿

of the front speakers.

“CENTER LEVEL”: Adjust the center speaker output level. *

“REAR L LEVEL”: Adjust the left rear speaker output level. **

“REAR R LEVEL”: Adjust the right rear speaker output level. **

“SUBWFR LEVEL”: Adjust the subwoofer output level. ***

For 5 CH/4 CH Stereo mode:

“L/R BALANCE”: Adjust the right and left balance of the front speakers.

“CENTER LEVEL”: Adjust the center speaker output level. ****

“REAR L LEVEL”: Adjust the left rear speaker output level. **

“REAR R LEVEL”: Adjust the right rear speaker output level. **

“SUBWFR LEVEL”: Adjust the subwoofer output level. ***

For 3D-PHONIC mode:

“L/R BALANCE”: Adjust the right and left balance of the front speakers.

“CENTER LEVEL”: Adjust the center speaker output level. *

“SUBWFR LEVEL”: Adjust the subwoofer output level.***

For Surround off and DSP OFF:

CONTROL,” then press 2/ 3.

The SOUND CONTROL menu appears.

4. Press 5 / ° to move

to “LEVEL ADJUST,” then press

2/ 3.

￿

“L/R BALANCE”: Adjust the right and left balance of the front speakers.

“SUBWFR LEVEL”: Adjust the subwoofer output level.***

Notes:

*	You cannot select “CENTER LEVEL” when “CTR SPK” is set
	to “NONE” (see page 17).
**	You cannot select “REAR L LEVEL” and “REAR R LEVEL”
	when “REAR SPK” is set to “NONE” (see page 17).

The LEVEL ADJUST menu appears.

5. Press 5 / ° to move	￿
to the item you want to
set or adjust, then press 2/ 3.

On these adjustment menus, you can do the followings:

*** You cannot select “SUBWFR LEVEL” when “SUBWOOFER”

is set to “NO” (see page 17).

**** You cannot select “CENTER LEVEL” when 4 CH Stereo

mode is selected.

6. Press EXIT once.

37