Bajaj Electricals DB30 manual Adjustment of Chain, Minor chain adjustment

Page 20

inspection and maintenance

Adjustment of Chain

1.When chain adjustment is needed, loosen 4 bolts under engine.

2.Move engine forward to tighten chain or backward to loosen chain.

3.Tighten bolts under engine Torque bolts to 25 ft./lbs.

4.Repetitively check tension of chain.

Engine adjusting bolts

Loosen

Chain

 

Nut 2

Nut 1

Loosen

 

Tighten

Chain

 

Chain

 

 

 

 

Minor chain adjustment

1.When minor chain adjustment is needed, loosen “Nut 2”. Turn “Nut 1” clockwise to tighten chain or counterclockwise to loosen chain.

2.When adjustment is accomplished, tighten Nut 2.

19-25mm 3/4 in. - 1 in.

Greasing procedures to the driving chain

1.Shut off the engine

2.Add light amounts of machine oil or chain grease to the driving chain. (Too much machine oil or chain grease may cause splattering to occur.)

Attention:

The chain should be replaced when the adjusting limit has reached it’s maximum.

17

Image 20
Contents DB30 Doodle Bug Mini Bike Copy of the Sales Receipt is Required Iii Table of contents Safety Safe Operation Safety Gear Stop Specifications Main DataLocation of parts Engine pull cord operation OperationLeft and right hand grip operation Fuel and fuel valve operation Fuel filling Fuel Valve operationItem to Check Content Inspection before ridingEngine starting and stopping Inspection and maintenance Checking the OILChanging the Oil Check-up of Spark PlugChecking & Cleaning the Air Filter Adjusting the Throttle Cable Adjusting the CarburetorAdjustment of Rear Brake Greasing procedures to the driving chain Adjustment of ChainMinor chain adjustment Clutch cleaning and maintenance Vehicle Washing Instructions for Storage Resumption of Service after Storage Maintenance Schedule Troubleshooting Engine will not StartTransistor Magnito Spark Plug Ignition Coil Electrical SchematicEngine Switch