INTRODUCTION IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
BIKE
OPERATION
CONDITIONING TROUBLESHOOTING LIMITED
GUIDELINES & MAINTENANCE WARRANTY
10
A S S E M B LY STEP 4 |
ASSEMBLY STEP 4: |
SEAT BACK |
ARC WASHERS (F) |
BOLTS (E) |
SEAT BASE |
SEAT MECHANISM |
ARC WASHERS (F) |
BOLTS (E) |
HARDWARE BAG 3 CONTENTS:
BOLT (E) |
| ARC WASHER (F) |
45 mm |
| 15 mm |
Qty: 8 | Side View | Qty: 8 |
|
|
AOpen HARDWARE BAG 3.
BAttach the SEAT BASE to the SEAT MECHANISM using 4 BOLTS (E) and 4 ARC WASHERS (F), as shown in illustration.
CAttach the SEAT BACK to the SEAT MECHANISM using 4 BOLTS (E) and 4 ARC WASHERS (F), as shown in illustration.
A S S E M B LY STEP 5 |
|
ASSEMBLY STEP 5: |
|
| CONSOLE MAST |
| BOLTS (H) |
BOLTS (H) | SPRING WASHERS (I) |
| |
ARC WASHERS (G) | WASHERS (C) |
| |
CONSOLE WIRES |
|
| MAIN FRAME |
HARDWARE BAG 4 CONTENTS:
BOLT (H) | WASHER (C) |
20 mm | 19 mm |
Qty: 4 | Qty: 2 |
| ARC WASHER (G) | SPRING WASHER (I) |
| 18 mm | 18 mm |
Side View | Qty: 2 | Qty: 2 |
AOpen HARDWARE BAG 4.
BTie the CONSOLE WIRES to the
CONSOLE MAST.
NOTE: Do not pinch wires.
CAttach the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (H), 2 SPRING WASHERS (I) and 2 WASHERS
(C) on the front surface. Use 2 BOLTS (H) and 2 ARC WASHERS (G) on the CONSOLE MAST sides, as shown in illustration.
11
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
BIKE OPERATION
LIMITED TROUBLESHOOTING CONDITIONING WARRANTY & MAINTENANCE GUIDELINES
B701_Rev.1.4.indd | 7/29/08 9:21:31 AM |