troubleshooting & maintenance
Troubleshooting
Problem: | Unit vibrates or bounces, not stable |
Solution: | Make sure the unit is not set up on plush carpet with padding. The unit needs to be |
| set up on a semi firm surface. Make sure the base of the vibration plate is level by |
| making adjustments with the 4 adjustment feet on the bottom of the unit. |
Problem: | Noises coming from the base unit of the vibration plate. |
Solution: | Lay the unit on it’s side and tighten all hardware on the bottom of the vibration plate. |
| Contact LifeSpan Customer Service if problems persist. |
Problem: | LCD Shows Er1 |
Solution: | Contact LifeSpan Customer Service. |
Problem: | LCD Shows Er3 |
Solution: | Check Wire connections at the back of the console and at the base of the unit where |
| the wires were attached when installing the Handlebar Support Frame. |
Problem: | LCD Shows Er5 |
Solution: | Possible Motor Overload. Turn the unit off and let it sit for 5 minutes. Turn the unit |
| back on and retry. If problem persists contact LifeSpan Customer Service. |
Problem: | LCD Shows |
Solution: | Safety key not making good contact. Remove safety key and reinstall. If problem |
| persists contact LifeSpan Customer Service. |
Maintenance:
1.Every 3 months using the tools provided check all assembly hardware to make sure it is tight.
2.Keep the unit clean and dry. Use a damp cloth to wipe the unit off.
3.If the unit is not going to be used for a period of time, unplug the unit and store in a clean dry environment.
14