Huffy M732211 manual Align dimple of top pole into trough of middle pole as shown

Page 10

2. While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.

IMPORTANT!

Align dimple of top pole section (4) into trough of middle pole section (5) as shown.

pole em

ID

 

STICKER

5"

 

 

pole middle

 

1-1/2"

 

DIMPLE

 

HOLE

CAUTION!

THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 3-1/2" MINIMUM OVERLAP, LEAVING 1-1/2"

BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER.

5

4

WOOD SCRAP

(NOT SUPPLIED)

ID# M732211 05/06

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Write Model Number From Box Here Before YOU Start Moving Product Registration Front View Parts List See Hardware Identifier Hardware Identifier Bolts & Pins Item #7 Item #44 Section a Assemble the Base Align dimple of top pole into trough of middle pole as shown Dimple Hole Do not Over Orientation of Struts Section B Attach the Backboard Elevator Tubes USE EYE Protection When Installing Springs 05/06 ID# M732211 ID# 05/06 ID# M732211 ID# M732211 05/06 Install Rim to Backboard 14.A
Top Page Image Contents