SECTION B: ATTACH THE BACKBOARD
This is what your system will look like when you’ve finished this section.
NOTE:
Board style will vary.
ITEMS REQUIRED FOR THIS SECTION
(2) 1/2”, (2) 9/16” and (2) 3/4” Wrenches
AND/OR
(2) Socket Wrenches and Sockets
1/2” 9/16” 3/4”
1. Fit spacer (44) into pawl (27). Then continue to assemble as shown. Tighten completely.
IMPORTANT!
Test fit bolts into holes of brackets and carefully rock them in a circular motion to ream out paint from holes if necessary.
29
14
44
44
49
35
9
27
ID# M732211 05/06 | 14 |