Huffy M732211 manual Product Registration

Page 4

NOTICE TO ASSEMBLERS

Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products,

periodically inspect for loose small parts.

ALL basketball systems, including those used for DISPLAYS, MUST be assembled and installed according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift support system.

WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC

BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY

HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD

COULD RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED

IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE

NUMBER:

U.S. 1-800-558-5234; CANADA: 1-800-284-8339; http://www.huffysports.com

IMPORTANT!

Remove all contents from boxes.

Be sure to check inside pole sections; hardware and additional parts are packed inside.

PRODUCT REGISTRATION:

Please remember to complete your product registration form on- line at: www.huffysports.com/customer_support/product_registration.

ID# M732211 05/06

4

Image 4
Contents Write Model Number From Box Here Before YOU Start Moving Product Registration Front View Parts List See Hardware Identifier Hardware Identifier Bolts & Pins Item #7 Item #44 Section a Assemble the Base Align dimple of top pole into trough of middle pole as shown Dimple Hole Do not Over Orientation of Struts Section B Attach the Backboard Elevator Tubes USE EYE Protection When Installing Springs 05/06 ID# M732211 ID# 05/06 ID# M732211 ID# M732211 05/06 Install Rim to Backboard 14.A