Huffy DC177 manual Do not Over Tighten

Page 13

3.Assemble pole bracket (12) using bolt (13) and locknut (14) as shown.

4.Attach pole assembly to base using carriage bolts (15) washers(10) and nuts (11) as shown. Two people are required for this step.

13

14

12

IMPORTANT!:

DO NOT OVER

TIGHTEN

WARNING!

TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.

15

10 11

IMPORTANT!:

THE CUT CORNERS OF THE POLE BRACKET NEED TO FACE TOWARD THE BACK OF THE BASE AS SHOWN.

13

01/04

P/N 211475

Image 13

Contents Portable Basketball System U.S.1-800-558-5234 and Canada Safety Instructions Front Back Qty Description Hardware Identifier Bolts & Screws Height Adjustment Before YOU Start Label Section a Assemble the PolesPole Sections Should have a AND/OR Section B Assemble the Base01/04 Do not Over Tighten 01/04 Socket Wrenches and Sockets 9/16 3/4 Section C Assemble the Elevator & Backboard01/04 FIG. a Keep Hardware Loose Until After is Completed 01/04 Tighten ALL Hardware from 8 After this Assembly is Completed 01/04 USE EYE Protection Section D Securing the System FIG.A Section E Install Front CoverInstall clips Section F NET InstallationInsert net into bottom of clip as shown Section G Apply Height and Moving Label Height AdjustmentSection H Height Adjustment