Huffy DC177 manual Section a Assemble the Poles, Label

Page 9

SECTION A: ASSEMBLE THE POLES

1.Mark pole sections with tape (not supplied) as shown.

1

Taped Reference Mark

3

2

WARNING	Taped Reference Mark
LABEL

2.Bounce middle pole (2) into top pole section

(1) using a wood scrap as shown until top pole no longer moves toward pole taped reference mark on middle pole.

NOTE: Pole sections should have a 3-1/2" (9 cm) minimum overlap.

Taped Reference

Mark

2

1

WOOD SCRAP

(NOT SUPPLIED)

9

01/04

P/N 211475

Image 9

Contents Portable Basketball System U.S.1-800-558-5234 and Canada Safety Instructions Front Back Qty Description Hardware Identifier Bolts & Screws Height Adjustment Before YOU Start Label Section a Assemble the PolesPole Sections Should have a AND/OR Section B Assemble the Base01/04 Do not Over Tighten 01/04 Socket Wrenches and Sockets 9/16 3/4 Section C Assemble the Elevator & Backboard01/04 FIG. a Keep Hardware Loose Until After is Completed 01/04 Tighten ALL Hardware from 8 After this Assembly is Completed 01/04 USE EYE Protection Section D Securing the System FIG.A Section E Install Front CoverInstall clips Section F NET InstallationInsert net into bottom of clip as shown Section G Apply Height and Moving Label Height AdjustmentSection H Height Adjustment