Huffy DC177 manual FIG. a

Page 17

3. Assemble lanyard (26) to locking pin (27) as shown (FIG A). Attach covers (35) onto pole mount bracket (28) with carriage bolt (19) and nut (11) as shown.

IMPORTANT!:

Loop end of pin lanyard (26) over carriage bolt (19) as it passes through the pole mount bracket

(28)during this assembly.

26

FIG. A

19

11

35

28

26

35

19

27

27

4. Apply logo and height indicator labels (23) to adjustment rod (51) as shown. Attach handle parts (52, 53) to adjustment rod with screw (55), carriage bolts (54), and flange nuts (11) as shown.

IMPORTANT!:

Indicator labels should be applied as close to holes as possible to prevent labels from being damaged during height adjustment.

23

23

11

11

52

51

53

54

55

54

17

01/04

P/N 211475

Image 17
Contents Portable Basketball System U.S.1-800-558-5234 and Canada Safety Instructions Front Back Qty Description Hardware Identifier Bolts & Screws Height Adjustment Before YOU Start Label Section a Assemble the PolesPole Sections Should have a AND/OR Section B Assemble the Base01/04 Do not Over Tighten 01/04 Socket Wrenches and Sockets 9/16 3/4 Section C Assemble the Elevator & Backboard01/04 FIG. a Keep Hardware Loose Until After is Completed 01/04 Tighten ALL Hardware from 8 After this Assembly is Completed 01/04 USE EYE Protection Section D Securing the System FIG.A Section E Install Front CoverInstall clips Section F NET InstallationInsert net into bottom of clip as shown Section G Apply Height and Moving Label Height AdjustmentSection H Height Adjustment