STEP 3 (See Diagram 3)
A.) Attach the holes on the end of the two Backrest Supports (#8) to the pivot on the Main Seat Support (#6). Secure the two Backrest Supports to the pivot with one M12 x 6 1/8” Hex Bolt (#42), two Ø 1” Washers (#52), and one M12 Aircraft Nut (#56). Do not over tighten the Nuts and Bolts. Make sure the Backrest Supports are able to swivel.
B.) Attach the two
C.) Attach the Backrest Board (#22) to the Backrest Supports. Secure it with four M8 x 1 5/8” Allen Bolts (#49) and four Ø 5/8” Washers (#54).
D.) Place the Seat Pad onto the
DIAGRAM 3
9